2A Switch-Mode Li-Ion Battery Charger

文件：654.24 Kbytes 页数：16 Pages

FEELING

远翔科技

2A Switch-Mode Li-Ion Battery Charger

文件：654.24 Kbytes 页数：16 Pages

FEELING

远翔科技

EIA -Based VectorPaktmSubrack Systems

文件：335.85 Kbytes 页数：1 Pages

Vectron

PC Mount: Flat Pack

文件：53.5 Kbytes 页数：1 Pages

TRIAD

PC Mount: Flat Pack

文件：53.48 Kbytes 页数：1 Pages

TRIAD

PC Mount: Flat Pack

文件：53.49 Kbytes 页数：1 Pages

TRIAD

PWM control buck converter designed to provide a simple, high efficiency solution for driving high power LEDs

  The FP8013 is a PWM control buck converter designed to provide a simple, high efficiency solution for driving high power LEDs. With a 0.1V reference voltage feedback control to minimize power dissipation, an external resistor sets the current as needed for driving various types of LEDs. The FP8013 ˙Input Voltage Range: 2.5 to 5.5V\n˙Adjustable Output Voltage From 0.1V to VIN\n˙Precision Feedback Reference Voltage: 0.1V (±10%)\n˙Output Current: 3A (Max.)\n˙Duty Cycle: 0~100%\n˙Internal Fixed PWM Frequency: 1.5MHz\n˙Low Quiescent Current: 100μA\n˙No Schottky Diode Required\n˙Built-in So;

Feeling

远翔科技

standalone linear Li-ion battery charger

    The FP8101 is a standalone linear Li-ion battery charger with exposed pad SOT23 package. With few external components, FP8101 is well suited for a wide range of portable applications. Charging current can be programmed by an external resistor. In standby mode, supply current will be reduced to a ˙Standalone Linear Charger for Single Cell Li-ion Batteries \n˙No External MOSFET, Sense Resistor, or Blocking Diode Required \n˙Up to 0.5A Programmable Charge Current\n˙Preset Charge Voltage with ±1% Accuracy\n˙Automatic Recharge\n˙2.9V Trickle Charge Voltage\n˙C/10 Charge Termination\n˙55uA St;

Feeling

远翔科技

1A Linear \t\tLi-Ion Battery Charger in SOP8/MSOP8

    The FP8102 is a standalone linear Li-ion battery charger with exposed pad SOP8/MSOP8 package. With few external components, FP8102 is well suited for a wide range of portable applications. Charging current can be programmed by an external resistor. In standby mode, supply current will be reduced ˙Standalone Linear Charger for Single Cell Li-ion Batteries \n˙No External MOSFET, Sense Resistor, or Blocking Diode Required \n˙Up to 1A Programmable Charge Current\n˙Preset Charge Voltage with ±1% Accuracy\n˙Automatic Recharge\n˙2.9V Trickle Charge Voltage\n˙C/10 Charge Termination\n˙55uA Stan;

Feeling

远翔科技

包装：散装 类别：RF/IF，射频/中频和 RFID RF 天线 描述：RF ANT 892MHZ PAN N TYP FEM POLE

PCTEL, Inc.