FP6861D中文资料Power Switch数据手册Fitipower规格书

描述 Description

The FP6861D is a cost-effective, low voltage, dual N-Channel MOSFET high-side power switch, optimized for self-powered and bus-powered Universal Serial Bus (USB) applications. The FP6861D is equipped with a charge pump circuitry to drive the internal MOSFET switch. The switch's low RDS(ON) meets USB voltage drop requirement, and a flag output is available to indicate fault conditions to the local USB controller. Additional features include soft-start to limit inrush current during plug-in, thermal shutdown to prevent catastrophic switch failure from high-current loads, and under-voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present. Besides, fault current is limited to specific current for FP6861D in dual port in accordance with the USB power requirements. FP6861D will prevent reverse current when it is disabled and VOUT is higher than VIN. The FP6861D is available in SOP-8 package with smallest components.

特性 Features

● Compliant to USB Specifications
● Built-In Low RDS(ON) N-Channel MOSFET
● Output Can Be Forced Higher Than Input (Off-State)
● Low Supply Current:
   130μA Typical at Switch On State
   0.2μA Typical at Switch Off State
● Wide Input Voltage Ranges: 2.7V to 5.5V
● Open-Drain Fault Flag Output
● Hot Plug-In Application (Soft-Start)
● 2.2V Typical Under-Voltage Lockout (UVLO)
● Current Limiting Protection
● Thermal Shutdown Protection
● Reverse Current Flow Blocking (No Body Diode)
● Logic Level Enable Pin
● SOP-8 Package
● RoHS Compliant
● UL NO.E322418 (Approved model: FP6861 series)

应用 Application

● USB Bus/Self Powered Hub
● USB Peripheral
● ACPI Power Distribution
● Notebook, Motherboard PC
● Battery-Charger Circuit