FH33J-40S-0.5SH连接器互连器件的FFC、FPC（扁平柔性）连接器组件规格书PDF中文资料

FH33J-40S-0.5SH属于连接器互连器件的FFC、FPC（扁平柔性）连接器组件。由日本广濑电机株式会社制造生产的FH33J-40S-0.5SHFFC、FPC（扁平柔性）连接器组件该系列产品是结合扁平柔性电缆 (FFC) 和柔性印刷电路板 (FPC) 材料使用的互连产品，主要用于执行电缆到板的互连功能，并且安装在印刷电路板上，为插入的 FFC 或 FPC 电缆同时提供电气连接和机械固定。

■Features

1. Low-profile, small PCB mounting area

Narrow width of only 2.5 mm reduced the board footprint by approximately 17 to 57, as compared to several similar FH Series HRS connectors.

2. Various contact pitch (0.4mm, 0.5mm, 1mm pitch) available

In addition to standard 0.5mm pitch, 0.4mm pitch, 1mm pitch also available.

3. Increased FPC/FFC retention force

-In the horizontal direction: Approximately 2.0 times (compared to 0.5mm pitch FH12 series.)

-In the vertical direction: Approximately 1.7 times (compared to 0.5mm pitch FH19 series.)

4. Conductive traces on the PCB can run under the connector

No exposed contacts on the bottom of the connector.

5. One finger operation of the actuator

Proven (in several other Hirose’s connectors) Flip-Lock® rotating actuator assures reliable mechanical and electrical connection with FPC/FFC, confirming it with a definite tactile feel.

6. Easy FPC insertion and reliable electrical connection

Proven Flip Lock actuator allows easy insertion of FPC/FFC and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection.

7. Accepts standard FPC thickness

0.3mm thick standard Flexible Printed Circuit (FPC) and Flexible Flat Cable (FFC) can be used.

8. Board placement with automatic equipment

Flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. Standard reel packaging contains 5000 connectors.

9. Halogen-free(FH33J Series)

As defined by IEC61249-2-21

Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm maximum