FDA802B中文资料2x150 W - 1x300 W class D digital input automotive power amplifier with load value recognition and low voltage operation数据手册ST规格书

描述 Description

The FDA802B is a dual bridge class D amplifier, designed in the most advanced BCD technology specially intended for car radio applications.
The FDA802B integrates a high performance D/A converter together with powerful MOSFET outputs in class D, to get an outstanding efficiency compared to the standard class AB.
The integrated D/A converter allows to reach outstanding performances (110 dB S/N ratio with 110 dB of dynamic range).
Thanks to the high-voltage MOSFET output stages it can operate both under standard car battery (6-18 V) and under boosted power supply (up to 50 V) to reach the highest possible power with integrated solution.
The feedback loop is including the output L-C low-pass filter, allowing superior frequency response linearity and lower distortion independently from the inductor and capacitor quality.
FDA802B is fully configurable through I2C bus interface and integrates a complete diagnostics array specially intended for automotive applications.
Thanks to the solutions implemented to solve the EMI problems, the device is intended to be used in the standard single DIN car-radio box together with the tuner.
Moreover FDA802B is able to work with power supply as low as 5.5 V, thus supporting the most recent low voltage ('start-stop') car-makers specification.
The device provides a breakthrough innovative digital impedance-meter which is able to communicate via I2C the output load value.

特性 Features

• AEC-Q100 (rev. G) qualified
• I2S and TDM digital input (3.3/1.8 V)
• Full I2C bus driving (3.3/1.8 V) with 8 different I2C bus addresses
• EMI compliance evaluated following normative IEC61967-4 and IEC62132-4
• Very low quiescent current
• Wide operating supply range: target 5.5 V-50 V
• MOSFET power outputs allowing high output power capability under step-up voltage:
• 2 x 140 W /8 Ω @ 50 V, 1 kHz THD = 1% (2 x180 W /8 Ω @ 50 V, 1 kHz THD =10%)
• Operation under standard car battery with high output power:
• 2 x 37 W /2 Ω @ 14 V, 1 kHz THD = 1%(2 x 46 W /2 Ω @ 14 V, 1 kHz THD = 10%)
• Independent channel operation
• Short to Vcc/GND diagnostic (including soft shorts up to 1k Ω)
• AC load diagnostic (working both with internally generated and externally generated tone)
• Input and output offset detector
• Legacy mode ('no I2C' mode)
• Package: LQFP64 exposed pad up