Ignition Gate Drive IC

Description The FAD1110−F085 is designed to directly drive an ignition IGBT and control the current and spark event of the coil. The coil current is controlled via the input pin. When the differential input is driven high, the output of the FAD1110−F085 is enabled to turn on the IGBT and star

文件：160.74 Kbytes 页数：8 Pages

ONSEMI

安森美半导体

Ignition Gate Driver IC

The FAD1110- F085 is designed to directly drive an ignition IGBT and control the current and spark event of the coil. The coil current is controlled via the input pin. When the input is driven high, the output of the FAD1110- F085 is enabled to turn on the IGBT and start charging the coil. • Control IGBT Current Limiting through VSENSE Pin\n• Differential Input for Ground Shift Disturbances Suppression\n• Signal Line Input Buffer\n• Input Spike Filter\n• Operation from Ignition or Battery Line\n• Ground Shift Tolerance −2 V to 3 V\n• Programmable Maximum Dwell Tim\n• Hard Shutdown Fol;

ONSEMI

安森美半导体

ONSEMI
SOIC-14

ONSEMI

安森美半导体

上传：深圳市英特法电子科技有限公司

FAIRCHIL
SOP8

FAIRCHIL

上传：深圳市翔睿腾科技有限公司

ON
SOP8

ON

上传：深圳市斌能达电子科技有限公司