eSPI/LPC/USB/PCIE I/F Controller

The F85526 PCI Express to ISA Bridge IC is necessary to be used for the new chipset system. The issue of the package size is critical for the layout requirement. So the F85526 is the optimal solution for the non-ISA chipset where the package will be the best chosen for economic solution and save the \nPCI Express base spec 1.1 compliant\nFully ISA bridge support except bus master (By conditions)\nIS interface supports 8/16bit I/O R/W, memory R/W and DMA R/W (via LPC interface)\nAll software transparent\nAll ISA signals can be isolated\nISA parallel IRQ transfer to serial IRQ by IRQ Serialier\nP;

FINTEK

精拓科技

1.8MHZ Zero-Drift CMOS Rail-to-Rail IO Opamp with RF Filter

Features • Single-Supply Operation from +1.8V ~ +5.5V • Rail-to-Rail Input / Output • Gain-Bandwidth Product: 1.8MHz (Typ@25°C) • Low Input Bias Current: 20pA (Typ@25°C) • Low Offset Voltage: 30µV (Max@25°C) • Quiescent Current: 180µA per Amplifier (Typ) • Operating Temperature: -45°C ~ +12

文件：624.66 Kbytes 页数：14 Pages

GAINSIL

聚洵

1.8MHZ Zero-Drift CMOS Rail-to-Rail IO Opamp with RF Filter

Features • Single-Supply Operation from +1.8V ~ +5.5V • Rail-to-Rail Input / Output • Gain-Bandwidth Product: 1.8MHz (Typ@25°C) • Low Input Bias Current: 20pA (Typ@25°C) • Low Offset Voltage: 30µV (Max@25°C) • Quiescent Current: 180µA per Amplifier (Typ) • Operating Temperature: -45°C ~ +12

文件：624.66 Kbytes 页数：14 Pages

GAINSIL

聚洵

1.8MHZ Zero-Drift CMOS Rail-to-Rail IO Opamp with RF Filter

Features • Single-Supply Operation from +1.8V ~ +5.5V • Rail-to-Rail Input / Output • Gain-Bandwidth Product: 1.8MHz (Typ@25°C) • Low Input Bias Current: 20pA (Typ@25°C) • Low Offset Voltage: 30µV (Max@25°C) • Quiescent Current: 180µA per Amplifier (Typ) • Operating Temperature: -45°C ~ +12

文件：624.66 Kbytes 页数：14 Pages

GAINSIL

聚洵