F81966数据手册FINTEK中文资料规格书

描述 Description

The F81966 is the featured IO chip for Industrial PC system. Equipped with one IEEE 1284 parallel port, 6 UART ports with Multi drop function (9-bit protocol), SIR, 80 port, master SPI, ACPI management function. Each UART provides 16/32/64/128 bytes FIFO. The UART supports legacy speeds up to 115.2K bps as well as even higher baud rates of 230K, 460K, or 921K bps to support higher speed modems. The F81966 supports the enhanced parallel port (EPP) and the extended capabilities port (ECP). The F81966 supports keyboard and mouse interface which is 8042-based keyboard controller. The F81966 integrated with hardware monitor, 7 sets of voltage sensor, 3 sets of creative auto-controlling smart fans and 2 temperature sensor pins for the accurate dual current type temperature measurement for CPU thermal diode or external transistors 2N3906 and one local temperature. The F81966 provides flexible features for multi-directional application. For instance, supports 80 GPIO pins, IRQ sharing function designed in UART feature for particular usage and accurate current mode H/W monitor will be worth in measurement of temperature. Others, the F81966 supports newest Intel PECI 3.0 interfaces for new generational CPU temperature usage, INTEL IBX PEAK, I2C and AMD TSI for temperature reading. In order to save the current consumption when the system is in the soft off state which is so called power saving function. The power saving function supports the system boot-on not only by pressing the power button but also by the wake-up events via GPIO0x, GPIO1x, RI1#, and RI2#. When the system enters the S3/S4/S5 state, F81966 can cut off the VSB power rail which supplies power source to the devices like the LAN chip, the chipset, the SIO, the audio codec, DRAM, and etc. The PC system can be emulated to G3-like state when the system enters S3/S4/S5 states. At the G3-like state, the F81966 consumes 5VSB power rail only. The integrated two control pins are utilized to turn on or off VSB power rail in the G3-like status. The turned on VSB rail is supplied to a wake up device to fulfill a low power consumption system which supports a wake up function. The F81966 are also suited for Skylake eSPI interface. The F81966 have eSPI and LPC interfaces where the interface would be detected automatically. Those interfaces could be workable with 1.8V or 3.3V. These features as above description will help you more and improve the product value. The F81966 is in the package of 128-LQFP. (14mm*14mm)(1)(1)

特性 Features

Features:
General Functions
◼ Comply With LPC 1.1 & eSPI 1.0 Interfaces
◼ Support ACPI
◼ Support WDT Reset Function
◼ Support WDT wake up while ERP function is enabled
◼ Provide 4 sets of GPIO (GPIO0x/1x/5x/8x) SMI event via PME# or SIRQ
◼ Provide different SIRQ channels for GPIO0x/1x/5x/8x
◼ Provide one KBC
◼ Provide Parallel Port (LPT) Which Could Be Divided Into Data And Signal Port Via Registers
◼ Support 80 Ports Which Could Be Selected From UART 6 Or LPT where default is output from printer’s data bus.
◼ Support Master SPI Function Which Could Be Selected From UART 6 Or LPT where default is output from printer’s data bus.
◼ Provide 6 fully functional UART and 1 SIR
Programmable 16/32/64/128 bytes FIFO
Multi drop function
Support IRQ Sharing
Provide auto flow control
◼ H/W monitor functions
Support OVP & UVP for 3VCC and VIN2&3
Support smart fan FQST for FAN 1
Support PECI 3.1
Support IBX PCH temperature reading via I2C
Support AMD TSI, MXM via I2C pins.
◼ 80 GPIO Pins for flexible application
◼ Support I2C Function Via Pin 55, 62, 68, 71 (SDA) & Pin 54, 61, 67, 76 (SCL); I2C slave 400K bps/
I2C master 66K bps
◼ Provide Power Saving Function (Comply ERP lot 6.0)
◼ Support Intel Deep Sleep Well (DSW) Timing Sequence
◼ Provide wake-up events via power button, GPIO0x, GPIO1x, RI1#, and RI2#
◼ Provide ATX emulates AT function
◼ 24 /48 Mhz (Default) Clock Input, Others Clock Input Could Be Programmable Via Register
◼ Support Auto Re-Generates PWSOUT# Signal Only At Always On Or AT Mode
◼ Packaged in 128-LQFP
Bus Interface
◼ Comply With Intel’s Slave LPC Interface Specification Revision 1.1
◼ Comply With Intel’s Slave eSPI 1.0 Specification
Intel Platform
◼ Support Skylake eSPI/LPC Interface
◼ Support Intel® Deep Sleep Well (DSW)
◼ SIRQ Support Low Voltage Level for 1.8V
Hardware Monitor Management
◼ Monitoring hardware monitor functions under S3 could be disabled.
◼ Digital Thermal Interfaces
Intel® PECI 3.1 for Intel CPU thermal monitoring
❑ 4 selectable PECI address 30h~33h
❑ CPU address auto detect mode
Intel Ibex thermal monitoring
SB-TSI for AMD® CPU and MXM thermal monitoring
T1 and T2 beta compensation
◼ Analog Thermal Interface
2 x Thermistor or Thermal Diode (BJT) connected to device ADC inputs
Support Dual Current Type (3℃) thermal inputs
1 x Local Temperature source
Temperature sensor can setting OVT limit and high limit
◼ Generates OVT#, PME#, BEEP or shutdown via hardware signals output on critical temperature events
OVT
❑ Temperature over limit support max three source
❑ Even output support level mode and pulse mode
❑ Event output can indicate by 1Hz LED or 400/800Hz BEEP
ALERT
❑ Even output support level mode and pulse mode
❑ Event output can indicate by 1Hz LED or 400/800Hz BEEP
BEEP
❑ Event output source support OVT or ALERT
◼ Fan Control and Monitor
3 Auto PWM or DAC fan controls
3 Fan speed monitoring inputs
Fan control support Stage Auto Mode (4-Limit and 5-Stage)/Linear Auto Mode/Manual Mode
Programmable hysteresis and setting points for all monitored items
Provide FAN real time status
Temperature over high limit FAN can force full speed
Programmable PWM mode up to 300 kinds of frequencies (15Hz~23.5KHz)
◼ 8 voltage monitoring and indication (VIN1, VIN2, VIN3, VIN4, 3VCC, 5VSB, 3VSB, VBAT)
Monitoring VBAT voltage could be disabled via the register.
Voltage-Protect Status
❑ Over Voltage Protect (OVP) Limit: 3VCC, VIN1, VIN2, VIN3
❑ Under Voltage Protect (UVP) Limit: 3VCC, VIN2, VIN3
Shut down when OVP/UVP occurred
❑ 3VCC, VIN2 and VIN3
◼ Case intrusion detection (COPEN#)
Even output via Beep and PME at the same time
Power Management
◼ Comply with ERP Lot 6.0
◼ Support ACPI
◼ Support Intel Deep Sleep Well (DSW) state control
◼ Support G3 like state control
◼ Built in Two Control Pins with VSB Power Sources Control
◼ System Wake-Up Control
Optional routing of events to generate PME on detection of:
❑ Keyboard key strokes
❑ Mouse movement and/or button left click
❑ Ring Indication RI1# and RI2# on the serial ports
◼ Provide ATX Emulates AT Function
◼ Support Auto Re-Generates PWSOUT# Signal Only At Always On Or AT Mode Which Would Be Auto Regenerated After
800ms Until S3# De-Asserted.
◼ AC Loss and Resume Control Method
Always On
Always Off
Bypass Mode
Keep Last State old Mode
Keep Last State new Mode (Do not check ATXPG)
Glue Functions
◼ LED status indication
Programmable blinking at S0, S3, Deep S3, S5 state
Use Along With UART1~6
❑ TX LED 1/2/3/4/5/6: Output Via DTR1/2/3/4/5/6#
❑ RX LED1/2/3/4/5/6: Output Via DSR1/2/3/4/5/6#
◼ Watch Dog Timer
Time resolution minute/second
❑ Maximum 256 minutes or 256 seconds
Time Out Signal Can Output Via WDTRST#, PWROK, PME#
Legacy Modules
◼ UART
F81966: 6 High-Speed 16C550/16C650/16C750/16C850/16C950 Compatible UARTs
Programmable 16/32/64/128-Byte Send/Receive FIFO Depth
Support RS232, RS422 and RS485
RS485 Mode
❑ Auto Flow Control
RS232 Mode
❑ Hardware Auto Flow Control With via DTR# or RTS#
Baud Rate
❑ Baud Rate Supports 115.2 Kbps, Up To 1.5 Mbps
❑ Programmable Baud Rate
Support IRQ 3,4,5,6,7,8,9,10,11 Sharing
Provide Multi Drop (9-Bits) Function For Gaming Machine
Support Ring-In Wake Up Via RI1# And RI2#
◼ Infrared
Support IrDA 1.0 SIR protocol (Multi with Com 6)
Maximum baud rate up to 115.2K bps
◼ Parallel Port(LPT)
One PS/2 compatible bi-directional parallel port
Support Enhanced Parallel Port (EPP) − Compatible with IEEE 1284
Support Extended Capabilities Port (ECP) − Compatible with IEEE 1284
Enhanced printer port back-drive current protection
◼ 80-Port Interface
Monitor 0x80 Port And Output The Value Via Signals Defined For 7-Segment Display.
High Nibble And Low Nibble Are Outputted Interleaved At 1KHz Frequency.
80-Port Is Programmable Via UART 6 Or LPT
Temperature Data Could Be Output Via 80 Port
Enable Via Power On Strapping Pin Or Register.
◼ Master SPI Interface
Support 8 Clock & 8 Bit Data.
CS# Could Be Kept Low Or Return To High Stage.
Programmable Via UART 6 Or LPT where default is output from printer’s data bus.
◼ PS/2 Keyboard and Mouse Controller (KBC)
Support Keyboard/Mouse wakeup and swap function
Compatibility with the 8042
Hardware Gate A20 and Hardware Keyboard Reset
◼ General-Purpose Input/ Output
80 GPIO pins, all GPIOs individually configured as input or output
GPIO0x and GPIO1x support interrupt status (wake up)
GPIO0x, GPIO1x, GPIO5x and GPIO8x support different SIRQ channels
GPIO1x Supports 8 Functions: GPIO (default), PME#, CLKOUT, BEEP, LED_VCC, LED_VSB, WDTRST#,
ALERT#
CLKOUT = 48MHz / (CLKOUT_PRE_DIV * 2), where CLKOUT would be 48/24/12/8MHz → Index 2Bh
(CLK_TUNE_PROG_EN = 0, BANK_PROG_SEL = 1), bit 5-4
Clocking, Supply and Package Information
◼ Clocks
CLKIN supports 24 /48 MHz (default) clock input, others clock could be programmable internally via register.
◼ Power Supply
1.8V VCC For ESPI Bus Operation
1.8V/3.3V VCC For LPC Bus Operation
5VSB, 3VCC, 3VSB, VBAT
◼ Package
128-PIN LQFP (14mm*14mm) Green Package
Operation Temperatures Range -40°C ~ 85°C
128-PIN LQFP (14mm*14mm) Green Package