LPC to 4 UART Datasheet

General Description The F81216 mainly provides 3 pure UART ports and one UART+ IR port through LPC. Each UART includes 16-byte send/receive FIFO, a programmable baud rate generator, complete modem control capability and an interrupt system. One watch dog timer is provided for system con

文件：755.35 Kbytes 页数：37 Pages

FINTEK

精拓科技

eSPI/LPC/USB/PCIE I/F Controller

The F81216 mainly provides 3 pure UART ports and one UART+ IR port through LPC.  Each UART includes 16-byte send/receive FIFO, a programmable baud rate generator, complete modem control capability and an interrupt system.(1)One watch dog timer is provided for system controlling and the time interval Supports LPC interface\nTotally provides 4 UART (16550 asynchronous) ports\n                  -    3 Pure UART\n                  -    1 UART+IR\n1 watch dog timer with WDTOUT# signal\n1 frequency input 24/48MHz  \nPowered by 3Vcc\n48-LQFP(7mm x 7mm)\n48-LQFP Green Package;

FINTEK

精拓科技

LPC to 4 UART Datasheet

General Description The F81216 mainly provides 3 pure UART ports and one UART+ IR port through LPC. Each UART includes 16-byte send/receive FIFO, a programmable baud rate generator, complete modem control capability and an interrupt system. One watch dog timer is provided for system con

文件：755.35 Kbytes 页数：37 Pages

FINTEK

精拓科技

LPC to 4 UART Datasheet

General Description The F81216 mainly provides 3 pure UART ports and one UART+ IR port through LPC. Each UART includes 16-byte send/receive FIFO, a programmable baud rate generator, complete modem control capability and an interrupt system. One watch dog timer is provided for system con

文件：755.35 Kbytes 页数：37 Pages

FINTEK

精拓科技

LPC to 4 UART 9-bit Protocol

文件：892.96 Kbytes 页数：43 Pages

FINTEK

精拓科技

eSPI/LPC/USB/PCIE I/F Controller

The F81216E LPC to 4 UART controller or eSPI to 4 UART controller. Each UART includes 128-byte send/receive FIFO, a programmable baud rate generator, complete modem control capability, auto flow control, RX/TX LED and an interrupt system. F81216E support programmable CLKIN and two sets of CLKOUTs. O ➢ Supports LPC/eSPI auto detection interface\n➢ Totally provides 4 128-byte FIFO UART (16950 asynchronous) ports\n➢ LED status indication for UART TX/RX\n➢ Auto flow control\n➢ 1 watch dog timer with WDT_OUT# signal\n➢ Support 9-bit protocol\n➢ 32 pins GPIO; GPIO34/35 support 6 selectable functions\;

FINTEK

精拓科技

LPC to 4 UART 9-bit Protocol

FINTEK

精拓科技