F72830数据手册FINTEK中文资料规格书

描述 Description

The F72830 is a quadro MOSFET drivers specifically designed to drive quadro power N-Channel MOSFETs as a four-phase linear regulators. The device contains under voltage protection for every linear controller, an external ceramic capacitor to adjust slew rate of soft-start, and integrated I2C interface. The built-in I2C interface provides the function to fine tune the output of every linear controller from 0.74V to 1.04V, 0.02V per step, and the default output is set to 0.8V.(1)The F72830 also offers 3 independent enable pins to control the corresponding linear controller. Linear controller 1 is active as power on, and other remained linear controller 2~4 are controlled by enable pin, EN2~4. Except being a regular linear controller, the F72830 can be paired with the chip, which contains AMD K8 power on/off timing sequence to be used a platform power supplier, for example, F71863, or any specific purpose. The chip is a 16pin SOP package and powered by 5/12V.(1)(1)

特性 Features

4 Channels of Linear Controller Supported Controlled by 3 Enable Pins:
                  -  Linear Controller 1 Will Be Active as Power on
                  -  Linear Controller 2~4 Can Be Active in any Sequence or at the  Same Time(in 3CLK Debounce)
Under Voltage Protection of All Linear Controllers
External Capacitor for Adjusting Soft-start Slew Rate
Integrated I2C Interface to Fine Tune Output of Linear Controller from 0.74V to 1.04V, 0.02V per Step, Typical Output Is 0.8V
Independent Enable Pin Controls Single Linear Controller On/Off Individually
Powered by VVDDA: 5~12V
16-SOP Green Package
16-SOP Green Package