EVAL-M1-IM818-A中文资料英飞凌数据手册PDF规格书

EVAL-M1-IM818-A is an evaluation board for motor drive applications based on a 3-phase IPM. Combined with

one of the available MADK control board options, it demonstrates Infineon's IPM technology for motor drives.

The kit demonstrates Infineon’s IPM technology for motor drives.

Main features of CIPOS™ Maxi IPM IM818-MCC are:

 1200 V TRENCHSTOP™ IGBT4

 Maximum blocking voltage VCES = 1200 V

 Maximum output current at 25°C case temperature IC = 16

 Rugged 1200 V SOI gate driver technology with stability against transient and negative voltage

 Allowable negative VS potential up to -11 V for signal transmission at VBS = 15 V

 Integrated bootstrap functionality

 Overcurrent shutdown

 Built-in NTC thermistor for temperature monitoring

 Under-voltage lockout at all channels

 Low side emitter pins accessible

 For all phase current monitoring (open emitter)

 Cross-conduction prevention

 All of 6 switches turn off during protection

 Programmable fault clear timing and enable input

 Lead-free terminal plating; RoHS compliant

The evaluation board characteristics are：

 Nominal input voltage 380 VAC

 Default 2.4 kW motor power output

 On board EMI filter

 Current sensing for each leg configured by default

 Sensing of DC-link voltage

 Measurement test-points compatible to standard oscilloscope probes

 PCB size is 197 mm x 140 mm and has two layers with 35 μm copper each

 RoHS compliant