EVAL-ADM2761EEBZ开发板套件编程器的评估演示板及套件规格书PDF中文资料

EVAL-ADM2761EEBZ属于开发板套件编程器的评估演示板及套件。由亚德诺半导体技术有限公司制造生产的EVAL-ADM2761EEBZ评估和演示板及套件该系列产品提供了一种方便的方法，在经过验证的实施环境中评估某些重点器件的性能或特性。评估方法通常有完善的文档说明，并且视乎具体情况由评估软件提供支持。产品通常由印刷电路板组成，板上已装有重点器件以及必要或有用的支持元器件，另外也可能包括其他组件，例如电缆或电源。对于数量特别多或类别独特的器件类别(如 ADC、DAC 和开关模式电源)，评估平台可组合为一个单独的产品系列。

GENERAL DESCRIPTION

The ADM2761E/ADM2763E are 500 kbps, 5.7 kV rms, signal isolated RS-485 transceivers that pass radiated emissions testing to the EN 55032, Class B standard with margin on a 2-layer printed circuit board (PCB). These devices are compliant to the RS-485 and RS-422 communication standards. The ADM2761E/ ADM2763E isolation barrier provides robust system level immunity to IEC 61000-4-x system level electromagnetic compatibility (EMC) standards. The devices are suitable for applications that require insulation against working voltages of 1060 V rms and 1500 V dc for the lifetime of the device.

The devices are protected against ≥±12 kV contact and ≥±15 kV air IEC 61000-4-2 electrostatic discharge (ESD) events on the RS-485 A, B, Y, and Z pins. The ADM2763E features a receiver cable invert pin to allow quick correction of the reversed cable connection on the A and B receiver bus pins while maintaining full receiver fail-safe performance.

These devices are optimized for low speed over long cable runs and have a maximum data rate of 500 kbps. The high differential output voltage makes these devices suitable for PROFIBUS® nodes when powered with 5 V on the VDD2 supply. The VDD1 primary supply and VDD2 isolated supply both support a wide range of voltages (1.7 V to 5.5 V and 3.0 V to 5.5 V, respectively). Half-duplex and full duplex device options are available in the industry standard 16-lead, wide body, standard SOIC_W package with 8.3 mm creepage and clearance.

FEATURES

5.7 kV rms, signal isolated RS-485 transceiver

1500 V peak and dc working voltage to DIN V VDE 0884-11

Low radiated emissions: passes EN 55032, Class B with margin on a 2-layer PCB

Receiver cable inversion smart feature (ADM2763E)

Correction for reversed cable connection on A and B bus pins while maintaining full receiver fail-safe feature

ESD protection on the RS-485 A, B, Y, and Z bus pins

≥±12 kV IEC 61000-4-2 contact discharge

≥±15 kV IEC 61000-4-2 air discharge

Low speed 500 kbps data rate for EMI control

Flexible power supply inputs

Primary VDD1 supply of 1.7 V to 5.5 V

Isolated VDD2 supply of 3.0 V to 5.5 V

PROFIBUS compliant for 5 V VDD2

Wide −40°C to +125°C operating temperature range

High common-mode transient immunity: >250 kV/μs

Short-circuit, open circuit, and floating input receiver fail-safe

Supports 192 bus nodes (72 kΩ receiver input impedance)

Full hot swap support (glitch free power-up and power-down)

Safety and regulatory approvals (pending)

CSA Component Acceptance Notice 5A, DIN V VDE 0884-11, UL 1577, CQC11-471543-2012, IEC 61010-1

16-lead, wide-body, SOIC_W package with 8.3 mm creepage and clearance in standard pinout

APPLICATIONS

Solar inverters

Electrical test and measurement

Heating, ventilation, and air conditioning (HVAC) networks

Industrial field buses

Building automation