EVAL-ADIN3310EBZ中文资料亚德诺数据手册PDF规格书

FEATURES

► Ethernet MAC interfaces: 10 Mb, 100 Mb or 1 Gb per port

► 6-port: 4x RMII/RGMII/SGMII and 2x RMII/RGMII

► 3-port: 2x RMII/RGMII/SGMII and 1x RMII/RGMII

► SGMII, 1000BASE-SX/1000BASE-LX/1000BASE-KX, and

100BASE-FX

► Low Latency, Layer 2 Ethernet switch

► Deterministic latency from port to port

► Cut-through or store and forward operation

► Traffic types and bridge delay per IEEE/IEC 60802

► Standard bridging per IEEE 802.1Q-2018 (tailored)

► Each port is nonblocking and independent

► 32 kB frame buffer per transmit port

► 4096 VLANs

► Time synchronization

► IEEE 802.1AS-2020

► IEEE 1588-2019 default profile

► IEEE C37.238-2017 energy profile2

► 8 ns timestamp resolution

► Frames timestamped on ingress or egress

► IEEE 802.1Q time sensitive networking bridging

► Qbv: enhancements for scheduled traffic

► Qci: per stream filtering and policing

► Qbu: frame preemption

► Qch: cyclic queuing and forwarding

► Qav: forwarding and queuing enhancement2

► Qcc: stream reservation protocol enhancements2

► Number of streams

► 16000 TSN Layer 2 streams

► 256 extended lookup streams (IPV4, IPV6, PCP, and so on)

► PROFINET SendList control

► High availability and redundancy

► IEEE 802.1CB Frame Replication and Elimination for

Reliability

► IEC62439-3:2016-03 HSR-/PRP-Compliant Protocol for

Seamless Failover

► IEC62439-3-2021-12 Media Redundancy Protocol

► Custom Layer 2 on two ports for PROFINET IRT, EtherNet/IP

beacon-based DLR, POWERLINK (100 Mbps)2

► Packet assist engine offloads host and manages TSN and switch

features

► Portable C drivers for TSN and industrial Ethernet protocols

► NETCONF support (driver to Sysrepo translation layer)

► Hardware root of trust based security features

► Secure boot, secure update with anti-rollback

► Hardware-based cryptography

► Secure host pairing Protocol

► Cryptographic authenticity checking

► Interfaces to external host processor

► RMII, RGMII, SGMII, SPI, dual SPI, or Quad SPI

► Power

► 3 external power supplies: 1.1 V, 3.3 V, and VDDIO_x (1.8 V,

2.5 V, or 3.3 V)

► Total chip power 60 mW per port at 1 Gbps, full utilization with

VDDIO_B = 1.8 V

► Package and temperature range

► 256-ball CSP_BGA, 14 mm × 14 mm, 0.8 mm pitch

► 196-ball CSP_BGA, 12 mm × 12 mm, 0.8 mm pitch

► Temperature range −40°C to +85 or −40°C to 105°C

APPLICATIONS

► Factory and process automation

► Motion control, robots, and cobots

► Energy automation

► Transportation

► Instrumentation

► Building automation

GENERAL DESCRIPTION

The ADIN3310 and ADIN6310 are 3-port and 6-port Gigabit Ethernet

time sensitive networking (TSN) switches with integrated security

primarily designed for industrial Ethernet applications. Each port

can be configured to operate at different speeds. These switches

have uncommitted media access controller (MAC) interfaces and

can be paired with Analog Devices, Inc., physical (PHY) layer

devices such as ADIN1100, ADIN1200, and ADIN1300, to form a

low power, low latency system. Four serial gigabit media independent

interface (SGMII) and serializer/deserializer (serdes) interfaces

allow backplane connections, connectivity to SFP modules and

cascade switches. The switch supports the suite of IEEE 802.1Q

time sensitive networking bridging features required by IEEE 60802

standard providing quality of service (QoS) for latency sensitive

streams. The device also includes hardware capability to support

parallel redundancy protocol (PRP) or high availability seamless

redundancy (HSR) redundancy protocols, thereby offloading the

host processor.