EVAL-ADG1634L开发板套件编程器的评估演示板及套件规格书PDF中文资料

EVAL-ADG1634L属于开发板套件编程器的评估演示板及套件。由亚德诺半导体技术有限公司制造生产的EVAL-ADG1634L评估和演示板及套件该系列产品提供了一种方便的方法，在经过验证的实施环境中评估某些重点器件的性能或特性。评估方法通常有完善的文档说明，并且视乎具体情况由评估软件提供支持。产品通常由印刷电路板组成，板上已装有重点器件以及必要或有用的支持元器件，另外也可能包括其他组件，例如电缆或电源。对于数量特别多或类别独特的器件类别(如 ADC、DAC 和开关模式电源)，评估平台可组合为一个单独的产品系列。

GENERAL DESCRIPTION

The EVAL-ADG1634LEBZ is the evaluation board for the

ADG1634L. The ADG1634L contains four independent single-pole,

double-throw (SPDT) switches. Each switch conducts equally well

in both directions when on, and each switch has an input signal

range that extends to the supplies. In the off condition, signal levels

up to the supplies are blocked.

An external VL supply pin provides logic control flexibility for lower

logic controls. The ADG1634L is both 1.2 V and 1.8 V JEDEC

standard compliant.

Figure 1 shows the EVAL-ADG1634LEBZ in a typical evaluation

setup. The EVAL-ADG1634LEBZ is located in the center of the

evaluation board. Eight test points are included to connect to each

of the source pins. Subminiature Version B (SMB) sockets are

included for the drain inputs. Three screw terminals power the

device. A 5-pin header is provided for user defined digital voltage, if

required.

Full specifications on the ADG1634L are available in the

ADG1634L data sheet available from Analog Devices, Inc., and

should be consulted in conjunction with this user guide when using

the EVAL-ADG1634LEBZ.

FEATURES

► Single inline headers provide flexibility for the field programmable

gate array (FPGA) or microcontroller 1.2 V or 1.8V logic input

signals

► SMD pin resistor or capacitor sockets available for the addition of

passive components

► SMB connector sockets provide flexibility for the input and output

signals

EVALUATION KIT CONTENTS

► EVAL-ADG1634LEBZ evaluation board

DOCUMENTS NEEDED

► ADG1634L data sheet

► EVAL-ADG1634LEBZ user guide

EQUIPMENT NEEDED

► DC voltage source (VDD/VSS)

► ±5 V for dual supply

► Optional digital logic supply (VL)

► 1.1 V to 1.3 V for 1.2 V logic

► 1.65 V to 1.95 V for 1.8 V logic

► Analog signal source

► Method to measure voltage, such as a digital multimeter (DMM)