EVAL-AD7986FMCZ开发板套件编程器的评估板-模数转换器（ADC）规格书PDF中文资料

EVAL-AD7986FMCZ属于开发板套件编程器的评估板-模数转换器（ADC）。由亚德诺半导体技术有限公司制造生产的EVAL-AD7986FMCZ评估板 - 模数转换器（ADC）模数转换器 (ADC) 评估板是预装有元器件的电路板，用于提供特定 ADC 或器件工作实例。特定板上的 A/D 转换器数量从 3 到 32 不等，每秒采样率从 2.5 kHz 到 26 GHz 不等，输入电压范围从 0 到 8 Vp-p。

GENERAL DESCRIPTION

The AD7986 is an 18-bit, 2 MSPS successive approximation, analog-to-digital converter (ADC). It contains a low power, high speed, 18-bit sampling ADC, an internal conversion clock, an internal reference (and buffer), error correction circuits, and a versatile serial interface port. On the rising edge of CNV, the AD7986 samples the voltage difference between the IN+ and IN− pins. The voltages on these pins usually swing in opposite phases between 0 V and VREF. It features a very high sampling rate turbo mode (TURBO = high) and a reduced power normal mode (TURBO = low) for low power applications where the power is scaled with the throughput.

FEATURES

18-bit resolution with no missing codes

Throughput: 2 MSPS (TURBO = high), 1.5 MSPS (TURBO = low)

Low power dissipation

15 mW at 2 MSPS, with external reference

26 mW at 2 MSPS with internal reference

INL: ±1 LSB typical, ±2.5 LSB maximum

SNR

95.5 dB, with on-chip reference

97.0 dB, with external reference

4.096 V internal reference: typical drift of 10 ppm/°C

True differential analog input voltage range: ±VREF

0 V to VREFwith VREFup to 5.0 V

Allows use of any input range

No pipeline delay

Logic interface: 1.8 V/2.5 V/2.7 V

Serial interface: SPI/QSPI™/MICROWIRE™/DSP compatible

Ability to daisy-chain multiple ADCs with busy indicator

20-lead 4 mm × 4 mm LFCSP (QFN)

APPLICATIONS

Battery-powered equipment

Data acquisition systems

Medical instruments

Seismic data acquisition systems