锂电池充电管理

The ET9513A is a cost-effective, fully integrated single-cell Li-Ion battery charger. The charger uses a\n CC/CV charge profile required by Li-Ion battery. The charger accepts an input voltage up to 28V but is disabled when the input voltage exceeds the OVP threshold, typically 6.9V, to prevent e ●28V Maximum Voltage for the Power Input\r\n\r\n● Internal Integrated Power MOSFETs\r\n\r\n● Support 4.35V or 4.4V/2.3A Factory Mode\r\n\r\n● 50mA Low Dropout Voltage Regulator\r\n\r\n● Status Pin Indicator\r\n\r\n● Programmed Charging Current\r\n\r\n● Programmed End-of-Charge Current\r\n\r\n● Under;

ETEK

力芯微

High-accuracy Linear Charger with USB Mode

The ET9513C is a cost-effective, fully integrated single-cell Li-Ion battery charger. The charger uses a CC/CV charge profile required by Li-Ion battery. The charger accepts an input voltage up to 28 V but is disabled when the input voltage exceeds the OVP threshold, typically 6.9 V, to prevent exce • 28 V Maximum Voltage for the Power Input\n\n• Internal Integrated Power MOSFETs\n\n• An internal top off timer\n\n• Support 4.2 V or 4.35 V/2.3 A Factory Mode\n\n• 50 mA Low Dropout Voltage Regulator\n\n• Status Pin Indicator\n\n• Programmed Charging Current\n\n• Programmed End-of-Charge Current\n;

ETEK

力芯微

Multi-Channel Hipot Tester

文件：1.78828 Mbytes 页数：2 Pages

GWINSTEKGood Will Instrument Co., Ltd.

固纬电子固纬电子实业股份有限公司

HERMETICALLY SEALED RELAY

文件：60.04 Kbytes 页数：3 Pages

HONGFA

宏发电声

isc N-Channel MOSFET Transistor

文件：279.95 Kbytes 页数：2 Pages

ISC

无锡固电