ET820982中文资料DC/DC转换器数据手册ETEK规格书

描述 Description

The ET820982 is a low power synchronous boost converter. It integrates a Low-dropout Linear Regulator (LDO) with a boost converter and provides two output rails. The boost output VMAIN is designed as an always-on supply for a main system, and the LDO output VSUB is designed as an always-on supply for power peripheral devices.The ET820982 supports automatic pass-through function. When input voltage is higher than pass-through threshold, the boost converter stops switching and passes the input voltage to the VMAIN rail; when input voltage is lower than the threshold, the boost works in Boost mode and regulates the output at the target value.The ET820982 can provide up to 50mA total output current at 0.7V input to 3.3V output conversion and with maximum efficiency at minimal quiescent current.

特性 Features

• 4uA low IQin low power mode

• Start-up into load at 0.7V input voltage

• Operating input voltage from 0.7V to 4.5V

• Fixed output voltages：VMAIN=3.3V，VSUB=2.8V

• Minimum 350mA switch peak current limit

• Integrated LDO

• Two modes controlled by MODE pin
-- Active mode: dual outputs at set values
-- Low power mode: LDO and Boost keeps on with low IQ

• Automatic pass-through

• Up to 93% efficiency at 5mA to 100mA load from 2V to 3.3V conversion

• DFN6 (1.5mm × 1.5mm) package:

应用 Application

• Smart remote control
• Wearable applications
• Low-power wireless applications
• Single-coin cell, single- or two-cell alkaline- powered applications