EPCS1

Serial Configuration Devices

FunctionalDescription WithSRAM-baseddevicesthatsupportactiveserialconfiguration,configurationdatamustbereloadedeachtimethedevicepowersup,thesystemreconfigures,orwhennewconfigurationdataisrequired.Serialconfigurationdevicesareflashmemorydeviceswithaserialint

EPCS1

Serial Configuration Devices

EPCS1

Serial Configuration Devices; ■ 1-, 4-, 16-, 64-, and 128-Mbit flash memory devices that serially configure Stratix® III, Stratix II GX, and Stratix II FPGAs, Arria™ GX FPGAs, and the Cyclone® series FPGAs using the active serial (AS) configuration scheme\r\n■ Easy-to-use four-pin interface\r\n■ Low cost, low-pin count, and non-volatile memory\r\n■ Low current during configuration and near-zero standby mode current\r\n■ 3.3-V operation\r\n■ Available in 8-pin and 16-pin small outline integrated circuit (SOIC) package\r\n■ Enables the Nios® processor to access unused flash memory through AS memory interface\r\n■ Re-programmable memory with more than 100,000 erase/program cycles\r\n■ Write protection support for memory sectors using status register bits\r\n■ In-system programming support with SRunner software driver\r\n■ In-system programming support with USB Blaster™, EthernetBlaster™, or ByteBlaster™ II download cables\r\n■ Additional programming support with the Altera® Programming Unit (APU) and programming hardware from BP Microsystems, System General, and other vendors\r\n■ Software design support with the Altera Quartus® II development system for Windows-based PCs as well as Sun SPARC station and HP 9000 Series 700/800\r\n■ Delivered with the memory array erased (all the bits set to 1);

EPCS16

Serial Configuration Devices

FunctionalDescription WithSRAM-baseddevicesthatsupportactiveserialconfiguration,configurationdatamustbereloadedeachtimethedevicepowersup,thesystemreconfigures,orwhennewconfigurationdataisrequired.Serialconfigurationdevicesareflashmemorydeviceswithaserialint

EPCS16SI16N

Serial Configuration Devices

FunctionalDescription WithSRAM-baseddevicesthatsupportactiveserialconfiguration,configurationdatamustbereloadedeachtimethedevicepowersup,thesystemreconfigures,orwhennewconfigurationdataisrequired.Serialconfigurationdevicesareflashmemorydeviceswithaserialint

EPCS1SI8N

Serial Configuration Devices

FunctionalDescription WithSRAM-baseddevicesthatsupportactiveserialconfiguration,configurationdatamustbereloadedeachtimethedevicepowersup,thesystemreconfigures,orwhennewconfigurationdataisrequired.Serialconfigurationdevicesareflashmemorydeviceswithaserialint

EPCS1_1

Serial Configuration Devices

EPCS128

Serial Configuration Devices

EPCS128

Serial Configuration Devices; ■ 1-, 4-, 16-, 64-, and 128-Mbit flash memory devices that serially configure Stratix® III, Stratix II GX, and Stratix II FPGAs, Arria™ GX FPGAs, and the Cyclone® series FPGAs using the active serial (AS) configuration scheme\r\n■ Easy-to-use four-pin interface\r\n■ Low cost, low-pin count, and non-volatile memory\r\n■ Low current during configuration and near-zero standby mode current\r\n■ 3.3-V operation\r\n■ Available in 8-pin and 16-pin small outline integrated circuit (SOIC) package\r\n■ Enables the Nios® processor to access unused flash memory through AS memory interface\r\n■ Re-programmable memory with more than 100,000 erase/program cycles\r\n■ Write protection support for memory sectors using status register bits\r\n■ In-system programming support with SRunner software driver\r\n■ In-system programming support with USB Blaster™, EthernetBlaster™, or ByteBlaster™ II download cables\r\n■ Additional programming support with the Altera® Programming Unit (APU) and programming hardware from BP Microsystems, System General, and other vendors\r\n■ Software design support with the Altera Quartus® II development system for Windows-based PCs as well as Sun SPARC station and HP 9000 Series 700/800\r\n■ Delivered with the memory array erased (all the bits set to 1);

EPCS128SI16N

Serial Configuration Devices