EP7209中文资料凌云逻辑数据手册PDF规格书

OVERVIEW

The EP7209 is a complete integrated system on a chip for enabling personal digital audio solutions. It is designed specifically for implementing audio processing algorithms in power sensitive applications. The core-logic functionality of the device is built around an ARM720T embedded processor.

FEATURES

■ Audio decoder system-on-chip

— Allows for support of multiple audio decompression algorithms

— Supports MPEG 1, 2, & 2.5 layer 3 audio decoding, including ISO compliant MPEG 1 & 2 layer 3 support for all standard sample rates and bit rates

— Supports bit streams with adaptive bit rates

— DAI (Digital Audio Interface) providing glueless interface to low power DACs, ADCs, and Codecs

■ Ultra low power consumption for MP3 playback

— 87 mW (typical) for 44.1 kHz samples/sec, 128 kbits/second

— 50 mW for 22.05 kHz samples/sec, 64 kbits/second

— <1 mW in Standby State

■ ARM720T processor

— ARM7TDMI CPU

— 8 kbytes of four-way set-associative cache

— MMU with 64-entry TLB (transition look-aside buffer)

— Write Buffer

— Windows® CE enabled

— Thumb code support enabled

■ Dynamically programmable clock speeds of 18, 36, 49, and 74 MHz at 2.5 V

■ Performance matching 100 MHz Intel® Pentium-based PC

■ OEM customization

— Integrated ARM720T RISC processor

— Up to 25 MHz of CPU processing power available (after digital audio decoding) for custom features such as software EQ or tone control, volume control, spectrum analyzer, random play order, etc.

— Allows for control of digital voice recorder function

■ LCD controller

— Interfaces directly to a single-scan panel monochrome LCD

— Panel width is programmable from 32 to 1024 pixels in 16-pixel increments

— Video frame buffer size programmable up to 128 kbytes

— Bits per pixel of 1, 2, or 4 bits

■ Memory controller

— Decodes up to 6 separate memory segments of up to 256 Mbytes each

— Each segment can be configured as 8, 16, or 32 bits wide and supports page-mode access

— Programmable access time for conventional ROM/SRAM/FLASH memory

— Supports Removable FLASH card interface

— Enables connection to removable FLASH card for addition of expansion FLASH memory modules

■ 38,400 bytes (0x9600) of on-chip SRAM for fast program execution and/or as a frame buffer

■ On-chip boot ROM for manufacturing support

■ Integrated DAI interface

— Connects directly to a Crystal® audio DAC

■ 27-bits of general-purpose I/O

— Three 8-bit and one 3-bit GPIO port

— Supports scanning keyboard matrix

■ SIR (up to 115.2 kbps) infrared encoder/decoder

— IrDA (Infrared Data Association) SIR protocol encoder/decoder

■ DC-to-DC converter interface (PWM)

— Provides two 96 kHz clock outputs with programmable duty ratio (from 1-in-16 to 15-in-16) that can be used to drive a DC to DC converter

■ 208-pin LQFP or 256-ball PBGA packages

■ Full JTAG boundary scan and Embedded ICE support