EN25D16-100QIP中文资料宜扬科技数据手册PDF规格书

GENERAL DESCRIPTION

The EN25D16 is a 16M-bit (2048K-byte) Serial Flash memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction. The EN25D16 is designed to allow either single Sector at a time or full chip erase operation. The EN25D16 can be configured to protect part of the memory as the software protected mode. The device can sustain a minimum of 100K program/erase cycles on each sector.

FEATURES

•Single power supply operation

- Full voltage range: 2.7-3.6 volt

• 16 Mbit Serial Flash

- 16 M-bit/2048 K-byte/8192 pages

- 256 bytes per programmable page

•High performance

- 75MHz clock rate

- Dual Output Fast Read instruction

• Low power consumption

- 5 mA typical active current

- 1 μA typical power down current

• Uniform Sector Architecture:

- 512 sectors of 4-Kbyte

- 32 blocks of 64-Kbyte

- Any sector or block can be

erased individually