Touch Button (Key) IC

The eKT5211 is a microprocessor with 4kx15bit programmable ROM and 304 byte SRAM.The system application supports up to 9 touch buttons which can be applied to One-Line type touch sensors.\n \nThe eKT5211 can auto-calibrate the parameters for a wide range of capacitance on the touch button sensor. Af CPU configuration \n4kx15 bits on-chip ROM\n304 bytes SRAM\n8-level stacks for subroutine nesting\n3 programmable Level Voltage Reset LVR:4.0V, 3.5V, and 2.7V\nFour CPU operating mode: Normal, Sleep, Green and IDLE\nOperating Frequency:\nIRC mode:\nMain Oscillator:4M/8MHz\nSub Oscillator:16k/64kTouc;

Elan

义隆

K-Band 2-Stage Power Amplifier

DESCRIPTION The MGFC5211 is a GaAs MMIC chip especially designed for 21.2 ~ 23.6 GHz band High Power Amplifier (HPA) . FEATURES ● RF frequency : 21.2 to 23.6 GHz ● Linear gain : ³ 13 dB ● P1dB : ³ 23 dBm ● DC power : Vd = 5 V, Id1 + Id2 = 270 mA

文件：24.5 Kbytes 页数：4 Pages

MITSUBISHI

三菱电机

Transimpedance amplifier 180MHz

Description The SA5211 is a 28 kΩtransimpedance, wide-band, low noise amplifier with differential outputs, particularly suitable for signal recovery in fiber optic receivers. The part is ideally suited for many other RF applications as a general purpose gain block. Features ■Extremely l

文件：172.71 Kbytes 页数：20 Pages

PHI

PHI

Transimpedance amplifier 180MHz

Description The SA5211 is a 28 kΩtransimpedance, wide-band, low noise amplifier with differential outputs, particularly suitable for signal recovery in fiber optic receivers. The part is ideally suited for many other RF applications as a general purpose gain block. Features ■Extremely l

文件：172.71 Kbytes 页数：20 Pages

PHI

PHI