连接器/电缆组件编程电缆 EAP-001

此工具与 LP35 系列编码器的一个可编程版本（绝对值或增量）结合使用。它允许用户在编码器上设置分辨率、索引和其他参数。 • 此工具经过配置，可通过 USB 连接方式连接到您的计算机\n\n• 它通过 M12 圆形连接器、预接线的接线盒连接（如果已订购带有接线盒配置的 LP35 系列），或直接使用单独电线（如果有电缆终端）连接到编码器。\n\n• 在使用软件编程电缆之前，可能需要额外的 USB 驱动程序。\n\n• 操作系统要求：Windows XP 或更高版本。;

Sensata

森萨塔

PROGRAMMING TOOL

Features • This tool is configured so that it connects to your computer via a USB connection • It connects to the encoder either through an M12 circular connector, a pre-wired terminal box connection (if you have ordered the LP series with the terminal box configuration) or directly with indi

文件：172.99 Kbytes 页数：1 Pages

SENSATA

森萨塔

包装：散装 类别：传感器，变送器 配件 描述：PROGRAMMING CABLE LP35 ENCODER

Sensata-BEI Sensors

SIL3 PLe SAFETY ENCODER SIGNAL SPLITTERS

Features Applications • Usable with standard and Safety encoders • Suitable for simultaneous safe and non-safe motor feedback connections • TTL/RS422, HTL or sine 1Vpp encoder interfaces • Safe output: same as connected encoder interface • Non-safe output: TTL/RS422 or HTL user selectable

文件：446.15 Kbytes 页数：5 Pages

SENSATA

森萨塔

InGaP HBT Gain Block

Product Description The ECG001 is a general-purpose buffer amplifier that offers high dynamic range in a low-cost surface-mount package. At 1000 MHz, the ECG001 typically provides 22 dB of gain, +25 dBm Output IP3, and +12.5 dBm P1dB. Product Features • DC – 6 GHz • +12.5 dBm P1dB at 1 GHz •

文件：244.08 Kbytes 页数：6 Pages

WJCI

InGaP HBT Gain Block

Product Description The ECG001B is a general-purpose buffer amplifier that offers high dynamic range in a low-cost surface-mount package. At 1000 MHz, the ECG001B typically provides 22 dB of gain, +25 dBm Output IP3, and +12.5 dBm P1dB. Product Features • DC – 6 GHz • +12.5 dBm P1dB at 1 GHz

文件：243.49 Kbytes 页数：5 Pages

WJCI