DW01-P

单节锂电池保护IC; •Reduction in Board Size due to Miniature Package SOT-23-6.\n•Ultra-Low Quiescent Current at 3μA (Vcc=3.9V).\n•Ultra-Low Power-Down Current at 0.1μA (Vcc=2.0V).\n•Precision Overcharge Protection Voltage4.28V ± 70mV\n•Load Detection Function during Overcharge Mode.\n•Two Detection Levels for Overcurrent Protection.\n•Delay times are generated by internal circuits. No external capacitors required.\n;

The DW01-P battery protection IC is designed to protect lithium-ion/polymer battery from damage or degrading the lifetime due to overcharge, overdischarge, and/or overcurrent for one-cell lithium-ion/polymer battery powered systems, such as cellular phones. The ultra-small package and less required external components make it ideal to integrate the DW01-P into the limited space of battery pack. The accurate ±50mV overcharging detection voltage ensures safe and full utilization charging. The very low standby current drains little current from the cell while in storage.

DW01-P

丝印：DW01；Package：SOT-23-6；One Cell Lithium-ion/Polymer Battery Protection IC

DW02R/C

FM/富满
SOT-23-5

FM/富满

DW06D

富满
SOT-23-6

富满

DW06D/S

FM
SOT23-6