DSPIC33FJ32GS406中文资料微芯科技数据手册PDF规格书

DEVICE OVERVIEW

The dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610 families of devices contain extensive Digital Signal Processor (DSP) functionality with a high-performance 16-bit microcontroller (MCU) architecture.

Operating Conditions

• 3.0V to 3.6V, -40ºC to +85ºC, DC to 50 MIPS

• 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS

Core: 16-Bit dsPIC33F

• Code-Efficient (C and Assembly) Architecture

• Two 40-Bit Wide Accumulators

• Single-Cycle (MAC/MPY) with Dual Data Fetch

• Single-Cycle Mixed-Sign MUL plus Hardware Divide

• 32-Bit Multiply Support

Clock Management

• ±1 Internal Oscillator

• Programmable PLLs and Oscillator Clock Sources

• Fail-Safe Clock Monitor (FSCM)

• Independent Watchdog Timer (WDT)

• Fast Wake-up and Start-up

Power Management

• Low-Power Management modes (Sleep, Idle, Doze)

• Integrated Power-on Reset and Brown-out Reset

• 1.7 mA/MHz Dynamic Current (typical)

• 50 µA IPD Current (typical)

High-Speed PWM

• Up to 9 PWM Pairs with Independent Timing

• Dead Time for Rising and Falling Edges

• 1.04 ns PWM Resolution

• PWM Support for:

- DC/DC, AC/DC, Inverters, PFC, Lighting

- BLDC, PMSM, ACIM, SRM

• Programmable Fault Inputs

• Flexible Trigger Configurations for ADC Conversions

Advanced Analog Features

• High-Speed ADC module:

- 10-bit resolution with up to two Successive Approximation Register (SAR) converters (up to 4 Msps)

- Up to 24 input channels grouped into 12 conversion pairs plus two voltage reference monitoring inputs

- Dedicated result buffer for each analog channel

• Flexible and Independent ADC Trigger Sources

• Up to 4 High-Speed Comparators with Direct Connection to the PWM module:

- 10-bit Digital-to-Analog Converter (DAC) for each comparator

- DAC reference output

- Programmable references with 1024 voltage points

Timers/Output Compare/Input Capture

• Six General Purpose Timers:

- Five 16-bit and up to two 32-bit timers/counters

• Four Output Compare (OC) modules Configurable as Timers/Counters

• Quadrature Encoder Interface (QEI) module Configurable as Timer/Counter

• Four Input Capture (IC) modules

Communication Interfaces

• Two UART modules (12.5 Mbps):

- With support for LIN/J2602 2.0 protocols and IrDA®

• Two 4-wire SPI modules (15 Mbps)

• ECAN™ module (1 Mbaud) CAN 2.0B Support

• Two I2C™ modules (up to 1 Mbaud) with SMBus Support

Direct Memory Access (DMA)

• 4-Channel DMA with User-Selectable Priority Arbitration

• UART, SPI, ECAN™, IC, OC and Timers

Input/Output

• Sink/Source 18 mA on 18 Pins, 10 mA on 1 Pin or 6 mA on 66 Pins

• 5V Tolerant Pins

• Selectable Open-Drain and Pull-ups

• 29 External Interrupts

Qualification and Class B Support

• AEC-Q100 REVG (Grade 1 -40ºC to +125ºC)

• Class B Safety Library, IEC 60730, VDE Certified

Debugger Development Support

• In-Circuit and In-Application Programming

• Two Program and two Complex Data Breakpoints

• IEEE 1149.2 Compatible (JTAG) Boundary Scan

• Trace and Run-Time Watch