DSLVDS1047PWR集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

DSLVDS1047PWR属于集成电路（IC）的驱动器接收器收发器。由德州仪器制造生产的DSLVDS1047PWR驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

1 Features

1• Designed for Signaling Rates up to 400-Mbps

• 3.3-V Power Supply Design

• 300-ps Typical Differential Skew

• 400-ps Maximum Differential Skew

• 1.7-ns Maximum Propagation Delay

• ±350-mV Differential Signaling

• Low Power Dissipation (13 mW at 3.3-V Static)

• Interoperable With Existing 5-V LVDS Receivers

• High impedance on LVDS Outputs on Power

Down

• Flow-Through Pinout Simplifies PCB Layout

• Meets or Exceeds TIA/EIA-644 LVDS Standard

• Industrial Operating Temperature Range

(−40°C to +85°C)

• Available in TSSOP Package

2 Applications

• Multifunction Printers

• Board-to-Board Communication

• Test and Measurement

• Printers

• Data Center Interconnect

• Lab Instrumentation

• Ultrasound Scanners

3 Description

The DSLVDS1047 device is a quad CMOS flowthrough

differential line driver designed for

applications requiring ultra-low power dissipation and

high data rates. The device is designed to support

data rates in excess of 400 Mbps (200 MHz) using

Low Voltage Differential Signaling (LVDS)

technology.

The DSLVDS1047 accepts low voltage TTL/CMOS

input levels and translates them to low voltage

(350 mV) differential output signals. In addition, the

driver supports a TRI-STATE function that may be

used to disable the output stage, disabling the load

current, and thus dropping the device to an ultra low

idle power state of 13 mW typical. The DSLVDS1047

has a flow-through pinout for easy PCB layout.

The EN and EN* inputs are ANDed together and

control the TRI-STATE outputs. The enables are

common to all four drivers. The and companion line

receiver (DSLVDS1048) provide a new alternative to

high power psuedo-ECL devices for high speed pointto-

point interface applications.