DS92LX1622集成电路（IC）的串行器解串器规格书PDF中文资料

DS92LX1622属于集成电路（IC）的串行器解串器。由德州仪器制造生产的DS92LX1622串行器，解串器串行器将并行提供的信息转换为较高符号率的串行数据流，从而减少数字信息传输所需的导线数量；解串器执行相反的功能。常用于在图像传感器、图像处理器和显示器之间传输视频数据，还有针对工业 I/O 设备等其他应用而定制的器件。

1FEATURES

2• Configurable Data Throughput

– 12–bit (min) up to 600 Mbits/sec

– 16–bit (def) up to 800 Mbits/sec

– 18–bit (max) up to 900 Mbits/sec

• 10 MHz to 50 MHz Input Clock Support

• Embedded Clock with DC Balanced Coding to

Support AC-Coupled Interconnects

• Capable to Drive up to 10 Meters Shielded

Twisted-Pair

• Bi-Directional Control Interface Channel with

I2C Support

• I2C Interface for Device Configuration. Single-

pin ID Addressing

• 16–bit Data Payload with CRC (Cyclic

Redundancy Check) for Checking Data

Integrity with Programmable Data

Transmission Error Detection and Interrupt

Control

• Up to 6 Programmable GPIO's

• AT-SPEED BIST Diagnosis Feature to Validate

Link Integrity

• Individual Power-Down Controls for Both SER

and DES

• User-Selectable Clock Edge for Parallel Data

on Both SER and DES

• Integrated Termination Resistors

• 1.8V- or 3.3V-Compatible Parallel Bus Interface

• Single Power Supply at 1.8V

• IEC 61000–4–2 ESD Compliant

• No Reference Clock Required on Deserializer

• Programmable Receive Equalization

• LOCK Output Reporting Pin to Ensure Link

Status

• EMI/EMC Mitigation

– DES Programmable Spread Spectrum

(SSCG) Outputs

– DES Receiver Staggered Outputs

• Temperature Range −40°C to +85°C

• SER Package: 32 Pin WQFN (5mm x 5mm)

• DES Package: 40 Pin WQFN (6mm x 6mm)

APPLICATIONS

• Industrial Displays, Touch Screens

• Medical Imaging

DESCRIPTION

The DS92LX1621 / DS92LX1622 chipset offers a

Channel Link III interface with a high-speed forward

channel and a full-duplex back channel for data

transmission over a single differential pair. The

Serializer/Deserializer pair is targeted for direct

connections between automotive camera systems and Host Controller/Electronic Control Unit (ECU).

The primary transport sends 16 bits of image data

over a single high-speed serial stream together with a

low latency bi-directional control channel transport

that supports I2C. Included with the 16-bit payload is

a selectable data integrity option for CRC (Cyclic

Redundancy Check) or parity bit to monitor

transmission link errors. Using TI’s embedded clock

technology allows transparent full-duplex

communication over a single differential pair, carrying

asymmetrical bi-directional control information without

the dependency of video blanking intervals. This

single serial stream simplifies transferring a wide data bus over PCB traces and cable by eliminating the

skew problems between parallel data and clock

paths. This significantly saves system cost by

narrowing data paths that in turn reduce PCB layers,

cable width, and connector size and pins.

In addition, the Deserializer inputs provide

equalization control to compensate for loss from the media over longer distances. Internal DC balanced

encoding/decoding is used to support AC-Coupled

interconnects.

The sleep function provides a power-savings mode

and a remote wake up interrupt for signaling of a

remote device.

The Serializer is offered in a 32-pin WQFN package,

and Deserializer is offered in a 40-pin WQFN

package.