DS90UB984-Q1中文资料德州仪器数据手册PDF规格书

1 Features

• DisplayPort (DP) / Embedded DisplayPort (eDP)

transmitter

– VESA DP v1.4a/eDP v1.4b transmitter

– HBR3/HBR2/HBR/RBR link bit rates

– Main Link: 1, 2, or 4 lanes

– Each lane up to 8.1Gbps

– AUX CH 1Mbps

– Hot Plug Detect (HPD)

– Extracts aggregated video streams to local eDP

display

– Designed for 4 K at 60Hz video resolution

– Stream synchronization and splitting

• FPD-Link IV interface

– 13.5/12.528/10.8/6.75/3.375Gbps per channel;

Up to 27Gbps over dual channels

– Coax/STP interconnect support

– Selectable 1, 2 channels

– Daisy-chain and splitting

– Adaptive equalization

• Ultra-low Latency Control Channel

– Two fast-mode plus I2C up to 1 MHz (up to

3.4MHz local bus access)

– High-speed GPIOs

– Supports SPI and UART pass-through GPIOs

• Backwards compatibility

– 720p 92x and 1080p/2K 94x FPD-Link III

product families

• Security and diagnostics

– Voltage and temperature monitoring

– BIST and pattern generation

– CRC and error diagnostics

– ECC on control bits

– Unique ID for counterfeit protection

• Advanced link robustness and EMC control

– Spread Spectrum Clocking Generation (SSCG)

– Adaptive Receiver Equalization (AEQ)

• Low power operation

– 1.8V and 1.15V Dual power supply

• AEC-Q100 Qualified for automotive applications

– AEC-Q grade-level 2 , –40°C to 105°C

– ISO 10605 and IEC 61000-4-2 ESD compliant

2 Applications

• Automotive Displays:

– Central Information Displays (CID)

– Rear Seat Entertainment (RSE)

– Digital instrument clusters

– Head units and HMI modules

– Head Up Display (HUD)

– Rear view and side mirror displays

3 Description

The DS90UB984-Q1 is an FPD-Link IV to DisplayPort

(DP) / Embedded DisplayPort (eDP) bridge device.

In conjunction with an FPD-Link IV serializer, the

chipset receives a high-speed serialized interface

over low-cost 50Ω coax or STP/STQ cables. The

DS90UB984-Q1 is a VESA DP v1.4a/eDP v1.4b

compatible device that supports advanced features

such as HBR3, and SuperFrame formats. The device

supports video resolutions of 4K 30-bit color and

higher. The FPD-Link IV interface supports video

and audio data transmission and full duplex control,

including I2C, and GPIO data over the same link.

Consolidation of video data and control over FPD-Link

IV lanes reduces the interconnect size and weight and

simplifies system design. EMI is minimized by the use

of low voltage differential signaling, data scrambling,

and randomization. In backward compatible FPD-Link

III mode, the device supports up to 2K resolutions with

24-bit color depth over a single/dual link .