DS90UB913QSQXSLASHNOPB.A中文资料德州仪器数据手册PDF规格书

1 Features

1• 10-MHz to 100-MHz Input Pixel Clock Support

• Single Differential Pair Interconnect

• Programmable Data Payload:

– 10-bit Payload up to 100 MHz

– 12-bit Payload up to 75 MHz

• Continuous Low Latency Bidirectional Control

Interface Channel With I2C Support at 400 kHz

• 2:1 Multiplexer to Choose Between Two Input

Imagers

• Embedded Clock With DC-Balanced Coding to

Support AC-Coupled Interconnects

• Capable of Driving up to 25 Meters Shielded

Twisted-Pair

• Receive Equalizer Automatically Adapts for

Changes in Cable Loss

• Four Dedicated General-Purpose Input/Output

Pins (GPIO) Available on Both Serializer and

Deserializer

• LOCK Output Reporting Pin and AT-SPEED BIST

Diagnosis Feature to Validate Link Integrity

• 1.8-V, 2.8-V or 3.3-V Compatible Parallel Inputs

on Serializer

• Single Power Supply at 1.8 V

• ISO 10605 and IEC 61000-4-2 ESD Compliant

• Automotive-Grade Product: AEC-Q100 Grade 2

Qualified

• Temperature Range −40°C to +105°C

• Small Serializer Footprint (5 mm × 5 mm)

• EMI/EMC Mitigation on Deserializer

– Programmable Spread Spectrum (SSCG)

Outputs

– Receiver Staggered Outputs

2 Applications

• Front- or Rear-View Camera for Collision

Mitigation

• Surround View for Parking Assistance

3 Description

The DS90UB91xQ-Q1 chipset offers an FPD-Link III

interface with a high-speed forward channel and a

bidirectional control channel for data transmission

over a single differential pair. The DS90UB91xQ-Q1

chipsets incorporate differential signaling on both the

high-speed forward channel and bidirectional control

channel data paths. The serializer and deserializer pair is targeted for connections between imagers and

video processors in an electronic control unit (ECU).

This chipset is ideally suited for driving video data

that requires up to 12-bit pixel depth plus two

synchronization signals along with bidirectional

control channel bus.

There is a multiplexer at the deserializer to choose

between two input imagers. The deserializer can

have only one active input imager. The primary video transport converts 10- and 12-bit data over a single

high-speed serial stream, along with a separate low

latency bidirectional control channel transport that

accepts control information from an I2C port and is

independent of video blanking period.