DS90CP22MX-8SLASHNOPB中文资料德州仪器数据手册PDF规格书

1FEATURES

2• DC - 800 Mbps Low Jitter, Low Skew Operation

• 65 ps (typ) of Pk-Pk Jitter with PRBS = 223−1

Data Pattern at 800 Mbps

• Single +3.3 V Supply

• Less than 330 mW (typ) Total Power

Dissipation

• Non-Blocking 'Switch Architecture'

• Balanced Output Impedance

• Output Channel-to-Channel Skew is 35 ps (typ)

• Configurable as 2:1 mux, 1:2 demux, Repeater

or 1:2 Signal Splitter

• LVDS Receiver Inputs Accept LVPECL Signals

• Fast Switch Time of 1.2ns (typ)

• Fast Propagation Delay of 1.3ns (typ)

• Receiver Input Threshold < ±100 mV

• Available in 16 Lead TSSOP and SOIC TRIPackages

• Conforms to ANSI/TIA/EIA-644-1995 LVDS

Standard

• Operating Temperature: −40°C to +85°C

DESCRIPTION

DS90CP22 is a 2x2 crosspoint switch utilizing LVDS

Low Voltage Differential Signaling) technology for

low power, high speed operation. Data paths are fully

differential from input to output for low noise

generation and low pulse width distortion. The non-

blocking design allows connection of any input to any

output or outputs. LVDS I/O enable high speed data

transmission for point-to-point interconnects. This

device can be used as a high speed differential

crosspoint, 2:1 mux, 1:2 demux, repeater or 1:2

signal splitter. The mux and demux functions are

useful for switching between primary and backup

circuits in fault tolerant systems. The 1:2 signal

splitter and 2:1 mux functions are useful for

distribution of serial bus across several rack-mounted

backplanes.

The DS90CP22 accepts LVDS signal levels, LVPECL

levels directly or PECL with attenuation networks.

The individual LVDS outputs can be put into TRIPackages

STATE by use of the enable pins.

For more details, please refer to the Application

Information section of this datasheet.