DS2506S-UNW-PPPP中文资料亚德诺数据手册PDF规格书

SILICON LABEL DESCRIPTION

The DS2501–UNW and DS2502–UNW are factory programmed versions of the DS2502 1K–bit Add–Only Memory. They differ from the standard DS2502 in their custom ROM family code 91H (DS2501–UNW) and 89H (DS2502–UNW) respectively, and the UniqueWare Identifier 5E7 in place of the upper 12 bits of the standard serialization field. With the DS2501–UNW, the upper two memory pages are not accessible; they always read FFH and cannot be programmed.

SPECIAL FEATURES

• 512 bits (DS2501–UNW) or 1024 bits (DS2502–UNW) Electrically Programmable Read Only Memory (EPROM) communicates with the economy of one signal plus ground

• Unique, factory-lasered and tested 64–bit registration number (8–bit family code, 36–bit serialization, 12–bit UniqueWare Identifier 5E7H, 8–bit CRC–tester) assures absolute traceability because no two parts are alike. Family code 91H for the DS2501–UNW, 89H for the DS2502–UNW

• Built–in multidrop controller ensures compatibility with other MicroLANTM products

• EPROM partitioned into two (DS2501–UNW) or four (DS2502–UNW) 256–bit pages for randomly accessing packetized data records

• Each memory page can be permanently write–protected to prevent tampering

• Device is an “add only” memory where additional data can be programmed into EPROM without disturbing existing data

• Reduces control, address, data, power and program ming signals to a single pin

• Directly connects to a single port pin of a microproces sor and communicates at up to 16.3k bits per second

• Presence detector acknowledges when reader first applies voltage

• Low cost TO–92 or 8–pin SOIC and TSOC surface mount packages

• Reads over a wide voltage range of 2.8V to 6.0V from –40°C to +85°C; programs at 11.5V to 12.0V from –40°C to + 50°C