DS21352数据手册集成电路（IC）的电信规格书PDF

描述 Description

The DS21352/552 T1 single chip transceiver contains all of the necessary functions for connection to T1 lines whether they are DS1 long haul or DSX-1 short haul. The clock recovery circuitry automatically adjusts to T1 lines from 0 feet to over 6000 feet in length. The device can generate both DSX-1 line build outs as well as CSU line build-outs of -7.5dB, -15dB, and -22.5dB. The onboard jitter attenuator (selectable to either 32 bits or 128 bits) can be placed in either the transmit or receive data paths. The framer locates the frame and multiframe boundaries and monitors the data stream for alarms. It is also used for extracting and inserting robbed-bit signaling data and FDL data. The device contains a set of internal registers which the user can access and control the operation of the unit. Quick access via the parallel control port allows a single controller to handle many T1 lines. The device fully meets all of the latest T1 specifications including ANSI T1.403-1995, ANSI T1.231-1993, AT&T TR 62411 (12-90), AT&T TR54016, and ITU G.703, G.704, G.706, G.823, and I.431.

特性 Features

• Complete DS1/ISDN-PRI/J1 transceiver functionality
• Long and Short haul LIU
• Crystal-less jitter attenuator
• Generates DSX-1 and CSU line build-outs
• HDLC controller with 64-byte buffers Configurable for FDL or DS0 operation
• Dual two-frame elastic store slip buffers that can connect to asynchronous backplanes up to 8.192MHz
• 8.192MHz clock output locked to RCLK
• Interleaving PCM Bus Operation
• Per-channel loopback and idle code insertion
• 8-bit parallel control port muxed or nonmuxed buses (Intel or Motorola)
• Programmable output clocks for Fractional T1
• Fully independent transmit and receive functionality
• Generates/detects in-band loop codes from 1 to 8 bits in length including CSU loop codes
• IEEE 1149.1 JTAG-Boundary Scan
• Pin compatible with DS2152/54/354/554 SCTs
• 100-pin LQFP package (14 mm x 14 mm) 3.3V (DS21352) or 5V (DS21552) supply; low power CMOS

简介

DS21352属于集成电路（IC）的电信。由制造生产的DS21352电信电信接口集成电路 (IC) 为通信网络接口提供特定功能和控制，例如以太网切换、线路驱动器、ISDN、放大器、通道扩展器、数字锁相环、DTMF、音频发生器和解码器、回声消除、检测器和发生器、DDA、电话线路监控器和主叫号码标识。