DS2119M中文资料Ultra3 LVD/SE SCSI端接器数据手册ADI规格书

描述 Description

The DS2119M Ultra3 LVD/SE SCSI terminator is both a low-voltage differential (LVD) and single-ended (SE) terminator. The multimode operation enables the designer to implement LVD in current products while allowing the end-user SE-backward compatibility with legacy devices. If the device is connected in an LVD-only bus, the DS2119M will use LVD termination. If any SE devices are connected to the bus, the DS2119M will use SE termination. This is accomplished automatically inside the part by sensing the voltage on the SCSI bus DIFFSENS line.
For the LVD termination, the DS2119M integrates two current sources with nine precision resistor strings. For the SE termination, one regulator and nine precision 110Ω resistors are used. Three DS2119M terminators are needed for a wide SCSI bus.

特性 Features

• Fully Compliant with SCSI SPI-2, SPI-3, SPI-4, Ultra160, and Ultra320
• Provides Multimode Low-Voltage
• Differential/Single-Ended (LVD/SE)
• Termination for Nine Signal Line Pairs
• Autoselection of LVD or SE Termination
• 5% Tolerance on SE and LVD Termination Resistance
• Low Power-Down Capacitance of 3pF
• On-Board Thermal Shutdown Circuitry
• SCSI Bus Hot Plug Compatible
• Fully Supports Actively Negated SE SCSI Signals

简介

DS2119M属于集成电路（IC）的信号端接器。由ADI制造生产的DS2119M信号端接器信号端接器用于向信号路径提供电气端点，以防止信号反射回电路而引起干扰。类型有电缆、DDCA、SCSI、HVD、SE、LVD、串行和 USB，端接数量为 1、2、6、8、9、14、15、18 或 27。