Ultra3 LVD/SE SCSI Terminator

DESCRIPTION The DS2119M Ultra3 LVD/SE SCSI Terminator is both a low-voltage differential (LVD) and singleended (SE) terminator. The multimode operation enables the designer to implement LVD in current products while allowing the end-user SE-backward compatibility with legacy devices. If the devic

文件：166.22 Kbytes 页数：9 Pages

Dallas

DiskStation DS211j

Key Features ●●24/7 PC-Less Download Server ●●DLNA Certified Media Server ●●3.5” and 2.5” HDD Support ●●Secure RAID Data Protection ●●Cool and Quiet

文件：760.54 Kbytes 页数：2 Pages

SYNOLOGY

群晖科技

Synology DiskStation DS211

Highlights ●●108MB/sec Reading, 55MB/sec Writing1 ●●Windows® ACL Support ●●Complete Backup Solutions ●●256-bit AES Hardware Encryption Engine ●●Hot Swappable Hard Drives ●●Cool and Quiet Design ●●Power-saving with only 24W in Operation

文件：622.57 Kbytes 页数：2 Pages

SYNOLOGY

群晖科技

SCSI Terminator

文件：76.91 Kbytes 页数：6 Pages

Maxim

美信

Ultra3 LVD/SE SCSI Terminator

文件：416.7 Kbytes 页数：9 Pages

Maxim

美信

Ultra3 LVD/SE SCSI Terminator

文件：308.17 Kbytes 页数：9 Pages

Maxim

美信

Ultra3 LVD/SE SCSI Terminator

文件：308.17 Kbytes 页数：9 Pages

Maxim

美信

Ultra3 LVD/SE SCSI Terminator

文件：308.17 Kbytes 页数：9 Pages

Maxim

美信

Ultra2 LVD/SE SCSI端接器

The DS2117M LVD/SE SCSI Terminator combines a low-voltage differential (LVD) and single-ended (SE) termination. The multimode operation enables the designer to combine LVD capability for current products with SE backwards-compatibility for legacy SCSI devices.\n On an LVD-only bus, the DS2117M will \n• Actively terminates 9 signal line pairs \n• Auto-selection of LVD or SE termination \n• Hardware or software switchable power-down mode \n• On-chip thermal shutdown circuitry \n• Operating ranges:\n• 0°C to +70°C;

ADI

亚德诺

Ultra3 LVD/SE SCSI端接器

DS2118M Ultra3 LVD/SE的SCSI终端匹配电路是一款具有低电压差分(LVD)和单端(SE)特性的终端匹配电路。多模式工作允许设计者在目前的产品中采用LVD，同时允许终端用户保持与早期器件的单端向下兼容性。如果设备仅连接到LVD总线上，DS2118M则使用LVD终端匹配。如果任何SE器件连接到总线上，则DS2118M将使用SE终端匹配。芯片内部通过检测SCSI总线的DIFFSENS线电压来自动完成上述功能。\n 对于LVD终端匹配，DS2118M集成了两路带有9个精密电阻串的电流源。对于SE终端匹配，则使用了一个稳压器和9个精密的110Ω电阻。对于宽SCSI总线，需要使用3片D \n• 完全兼容于SCSI SPI-2、SPI-3、SPI-4、Ultra160和Ultra320规范 \n• 提供多种模式低电压 \n• 差分/单端(LVD/SE) \n• 九对信号线端接 \n• 自动选择LVD或SE终端匹配 \n• 5%的SE和LVD终端电阻误差 \n• 极低的3pF断电电容 \n• 片内热关断电路 \n• 热插拔兼容于SCSI总线 \n• 完全支持反相SE SCSI信号;

ADI

亚德诺