DS1708S数据手册集成电路（IC）的监控器规格书PDF

描述 Description

The DS1707/DS1708 3.3- or 5.0-Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, voltage sense, and external override. A precision temperature-compensated reference and comparator circuit monitor the status of VCC at the device and at an upstream point for maximum protection. When the sense input detects an out-of-tolerance condition a non-maskable interrupt is generated. As the voltage at the device degrades an internal power fail signal is generated which forces the reset to an active state. When VCC returns to an in-tolerance condition, the reset signal is kept in the active state for a minimum of 130ms to allow the power supply and processor to stabilize.

特性 Features

• Holds microprocessor in check during power transients
• Automatically restarts microprocessor after power failure
• Monitors pushbutton for external override
• Accurate 5%, 10% or 20% resets for 3.3V systems and 5% or 10% resets for 5.0V systems
• Eliminates the need for discrete components
• 20% tolerance compatible with 3.0V systems
• Pin compatible with the MAXIM MAX707/MAX708 in 8-pin DIP, 8-pin SO packages
• 8-pin DIP, 8-pin and µSOP SO and 8-pin µSOP packages available
• Industrial temperature range -40°C to +85°C

简介

DS1708S属于集成电路（IC）的监控器。由制造生产的DS1708S监控器PMIC 监控器用于监视和/或控制电路中的电压轨，能够连接微控制器以维持一定的功率限值。监控器类型包括电池备用电路、监控器、多电压监控器、电源监控器、稳压器/监控器、复位计时器、定序器、简单复位/上电复位、智能开/关控制器、系统管理器、电压检测器和看门狗电路。