DS160PR410-Q1中文资料德州仪器数据手册PDF规格书

1 Features

• Four-channel linear redriver supporting PCIe® 4.0

– Backward compatible to PCIe 3.0, 2.0, 1.0

• Protocol agnostic linear equalizer supporting most

AC coupled interfaces up to 20Gbps

• Integrated two 2x2 Crosspoint mux function

• 12dB PCIe 4.0 reach extension over PVT with

16dB CTLE boost

• Ultra-low latency of 100ps

• Excellent performance at 16Gbps (8GHz Nyquist)

– -15 / -20dB Rx / Tx return loss

– 1200mV AC linearity

• High BW resulting excellent linear EQ curves

• Single 3.3V supply with 160mW/chan active power

• Immunity to supply noise with internal voltage

regulator

• Automatic receiver detection for PCIe use cases

• Linear redriver allows seamless support for PCIe

link training

• Support for x4, x8, x16 bus width in pin mode, and

x1, x2, x4, x8, x16 in I2C mode

• Pin-strap, SMBus or EEPROM programming

– 18 EQ boost 5 flat gain settings

• –40 to 105°C (grade 2) ambient temperature

support without heatsink

• 5mm x 7mm automotive friendly package with 0.5

mm pitch and wettable flank

2 Applications

• Automotive Advanced driver assistance systems

(ADAS)

• Automotive Infotainment & cluster

3 Description

The DS160PR410-Q1 is a four channel low-power

high-performance linear redriver with integrated two

2x2 cross-point mux designed to support PCIe® 4.0

and other interfaces up to 20Gbps.

The DS160PR410-Q1 receivers deploy continuous

time linear equalizers (CTLE) to provide a

programmable high-frequency boost. The equalizer

can open an input eye that is completely closed

due to inter-symbol interference (ISI) induced by

an interconnect medium, such as PCB traces. The

CTLE receiver is followed by a linear output driver.

The linear data-paths of DS160PR410-Q1 preserve

transmit preset signal characteristics. The linear

redriver becomes part of the passive channel that

as a whole get link trained for best transmit and

receive equalization settings. This transparency in

the link training protocol results in best electrical link

and lowest possible latency. Low channel-channel

cross-talk, low additive jitter and excellent return loss

makes the device almost a passive element in the

link, but with its useful equalization. The data-path

of the device uses an internally regulated power rail

that provides high immunity to any supply noise on

the board. The device also has low AC and DC

gain variation providing consistent equalization in high

volume platform deployment.