DS1411-S09数据手册连接器互连器件的PC卡插座规格书PDF

描述 Description

The DS1411 is a sophisticated RS-232-to-1-Wire® adapter and iButton holder that performs RS-232-level conversion and actively generates the 1-Wire communication signals. Together with an adequate software driver, it enables a Windows®-based PC to directly read all and write any non-EPROM iButton devices. The DS1411 has a DS9098P retainer for a single F5 MicroCan. For a list of suitable 1-Wire network cables, e.g., to connect multiple iButtons, refer to the Connectivity Matrix table in the DS1402x 1-Wire network cables data sheet. 1-Wire communication is supported by the adapter for standard speed as well as overdrive speed. The serial port must support a data transmission rate of 9600 bits/s. Under software control, the adapter can be set up for RS-232 data rates of 19200bps, 57600bps, and 115200bps. The two higher rates are recommended for communication at overdrive speed with overdrive capable devices. Since the DS1411 operates in a byte mode, every data byte received from the RS-232 port generates eight time slots on the 1-Wire bus. The DS1411 is based on the DS2480B serial 1-Wire line driver chip. The RXD/TXD polarity select input of the DS2480B is connected to VDD (noninverting). Free software drivers can be downloaded from www.maximintegrated.com/1-Wiredrivers.

特性 Features

·Small Size, True-Ground Interface to an RS-232 COM Port for Reading and Writing iButton® Devices
·CE and FCC Compliant
·Works with Bipolar Logic Signals of ±5V to ± 12V (RS-232C) as well as Unipolar Signals of 5V to 12V
·Supports Reading and Writing at Standard and Overdrive Speeds
·Provides Strong Pullup to 5V for Temperature iButton and EEPROM iButton
·Communicates at Data Rates of 9.6kbps (default), 19.2kbps, 57.6kbps, and 115.2kbps
·Powered Entirely from an RS-232 Interface
·Standard DB9 Female Connector for Mating to the COM Port of a Computer with DS9098P iButton Retainer for a Single iButton
·Includes DS2502 Identification Chip (DS1411-009 Version Only)

简介

DS1411-S09属于连接器互连器件的PC卡插座。由制造生产的DS1411-S09PC 卡插座PC 卡插槽是设计用于接受卡式存储器（例如 CFast、SIM、PCMCIA、CF 卡、CardBus、ExpressCard 和 SD）的连接器，允许通过铰链盖、推拉和自动弹出方法来定期拆卸和插入。这些器件提供表面、板、螺丝、跨装、卡入和边缘安装以及自由悬挂和手持版本。