DS1021中文资料可编程、8位、硅延迟线数据手册ADI规格书

描述 Description

The DS1021 is an 8-bit programmable delay line that reproduces an input logic state at the output after a user-programmed delay. It is similar to the DS1020 but with the economy of reduced specifications. Available in two versions, total delays are varied over 256 steps and range from an inherent 10ns minimum delay in both versions to a maximum delay of 137.5ns. The DS1021 can be programmed over the 3-wire serial port or the 8-pin parallel port. The DS1021 is TTL- and CMOS-compatible and capable of driving up to ten 74LS-type loads. Both leading- and trailing-edge accuracy are specified.
The DS1021 is an effective, economical solution to the designer working with the complex timing requirements of mismatched ASICs or other components, or with the strict timing tolerances of increasing system clock rates. With the DS1021's programmable outputs, the user can precisely adjust timing to application needs and improve system performance. Innovative circuit designs and factory laser or EPROM trimming enhance accuracy without the need for external components, saving cost and space.

特性 Features

• All-silicon time delay
• Models with 0.25ns and 0.5ns steps
• Programmable using 3-wire serial port or 8-bit parallel port
• Leading and trailing edge accuracy
• Auto-insertable, low profile
• Low-power CMOS with TTL compatibility
• Vapor phase, IR, and wave solderable

简介

DS1021属于集成电路（IC）的延迟线。由制造生产的DS1021延迟线时钟延迟线产品族中的产品属于数字器件，用于在数字信号中引入时间延迟，以便将提交给器件输入的信号跃迁，经过某一已知时间之后在输出端复现。它们常用于高速数字系统，以校正或补偿不同信号路径之间的信号传播时间的偏差。这些器件可用于产生固定、可选或可变持续时间的延迟。