DRV8210DSG集成电路（IC）的电机驱动器控制器规格书PDF中文资料

DRV8210DSG属于集成电路（IC）的电机驱动器控制器。由德州仪器制造生产的DRV8210DSG电机驱动器，控制器产品属于电机驱动器和控制器电源管理集成电路 (PMIC) 系列，可用于控制或操作从某电源施加到电机或相关机电执行器的电源。所实现的具体功能和特性集根据预期负载和预期应用的特性有很大差异，范围从用于有刷电机的简单开环速度控制到基于步进电机的高级闭环运动控制。

1 Features

• N-channel H-bridge motor driver

– MOSFET on-resistance: HS + LS 1 Ω

– Drives one bidirectional brushed DC motor

– Two unidirectional brushed DC motors

– One single- or dual-coil latching relay

– Push-pull and bistable solenoids

– Other resistive, inductive, or LED loads

• 1.65-V to 11-V operating supply voltage range

• High output current capability:

– Full-bridge: 1.76-A peak

– Half-bridge: 1.76-A peak per output

– Parallel half-bridge: 3.52-A peak

• Multiple interfaces for flexibility and reduced GPIO

• Standard PWM Interface (IN1/IN2)

• Supports 1.8-V, 3.3-V, and 5-V logic inputs

• Ultra low-power sleep mode

– <84.5 nA @ VVM = 5 V, VVCC = 3.3 V, TJ = 25°C

– Timed autosleep mode to reduce GPIO

• Protection features

– Undervoltage lockout (UVLO)

– Overcurrent protection (OCP)

– Thermal shutdown (TSD)

• Family of devices. See Device Comparison for

details.

– DRV8210: 1.65-11 V, 1 Ω, multiple interfaces

– DRV8210P: Sleep pin, PWM interface

– DRV8212: 1.65-11 V, 280 mΩ, multiple

interfaces

– DRV8212P: Sleep pin, PWM interface

– DRV8220: 4.5-18 V, 1 Ω, multiple interfaces

2 Applications

• Brushed DC motor, solenoid, & relay driving

• Water, gas, & electricity meters

• IP network camera IR cut filter

• Video doorbell

• Machine vision camera

• Electronic smart lock

• Electronic and robotic toys

• Blood pressure monitors

• Infusion pumps

• Electric toothbrush

• Beauty & grooming

3 Description

The DRV8210 is an integrated motor driver with

four N-channel power FETs, charge pump regulator,

and protection circuitry. The tripler charge pump

architecture allows the device to operate down to 1.65

V to accommodate 1.8-V supply rails and low-battery

conditions. The charge pump integrates all capacitors

to reduce the overall solution size of the motor driver

on a PCB and allows for 100% duty cycle operation.

The DRV8210 supports multiple control interface

modes including: PWM (IN1/IN2), phase/enable (PH/

EN), independent half-bridge, and parallel half-bridge.

Each interface supports a low-power sleep mode to

achieve ultra-low quiescent current draw by shutting

down most of the internal circuitry.

The device can supply up to 1.76-A peak output

current. It operates with a supply voltage from 1.65

V to 5.5 V.

The driver offers robust internal protection features

include supply undervoltage lockout (UVLO), output

overcurrent (OCP), and device overtemperature

(TSD).

The DRV8210 is part of a family of devices which

come in pin-to-pin scalable RDS(on) and supply voltage

options to support various loads and supply rails with

minimal design changes. See Device Comparison for

information on the devices in this family. View our full

portfolio of brushed motor drivers on ti.com.