DRV8163H-Q1中文资料德州仪器数据手册PDF规格书

1 Features

• AEC-Q100 qualified for automotive applications:

– Temperature grade 1: –40°C to +125°C, TA

• Functional Safety-Capable

– Documentation available to aid functional safety

system design

• 4.5V to 65V (70V abs. max) operating range

• MOSFET ON resistance (HS + LS): 43mΩ

• Maximum output current = 40A

• 2 Interface options - HW or SPI

• PWM frequency operation up to 100kHz with

automatic dead time assertion

• Configurable slew rate and spread spectrum

clocking for low electromagnetic interference (EMI)

• Integrated current sense (eliminates shunt resistor)

• Proportional load current output on IPROPI

• Die temperature monitoring on IPROPI (SPI only)

• Configurable current regulation

• Protection and diagnostic features with

configurable fault reaction (latched or retry)

– Load diagnostics in both the off-state and onstate

to detect open load and short circuit

– Voltage monitoring on supply (VM)

– Over current protection

– Over temperature warning (SPI only)

– Over temperature protection

– Powered off Braking

– Fault indication on nFAULT pin

• Supports 1.8V, 3.3V, 5V logic inputs

• Low sleep current - 7μA typical at 25°C

• Device family comparison table

2 Applications

• 24V and 48V Automotive Body Systems

• Automotive brushed DC motors, Solenoids

• Door modules , mirror modules, wiper modules

and seat modules

• Trunk lift, Window lift

• Steering column, Sunroof shade

• Electric Vehicles, Truck, Bus and other

Commercial Vehicles

3 Description

The DRV8163-Q1 is a wide-voltage, high-power

fully integrated half-bridge driver for 24V and 48V

automotive applications. Designed in a BiCMOS highpower

process technology node, this device in a

power package offers excellent power handling and

thermal capability while providing compact package

size, ease of layout, EMI control, accurate current

sense, robustness, and diagnostic capability.

The device integrates a N-channel half-bridge, charge

pump, high-side current sensing with regulation,

current proportional output, and protection circuitry.

The integrated sensing uses a current mirror,

removing the need for shunt resistors, saving board

area, and reducing system cost. A low-power sleep

mode is provided to achieve low quiescent current.

The device offers voltage monitoring and load

diagnostics, as well as protection features against

overcurrent and overtemperature. Fault conditions are

indicated on the nFAULT pin. It is available in two

variants: HW interface and SPI interface. The SPI

variant offers more flexibility in device configuration

and fault observability.