DRV5053CAQLPGM传感器变送器的磁性传感器-线性罗盘（IC）规格书PDF中文资料

DRV5053CAQLPGM属于传感器变送器的磁性传感器-线性罗盘（IC）。由德州仪器制造生产的DRV5053CAQLPGM磁性传感器 - 线性，罗盘（IC）该系列产品可用于将磁场强度作为一个可变数量进行测量，而相比之下，类似产品仅检测是否存在强度超过某个限值的磁场。常见的应用包括测量地球磁场，以类似于传统罗盘的方式进行定向，市面上的一些器件允许以相对于磁场的物理方向直接读取测量值。

1 Features

• Linear output hall sensor

• Superior temperature stability

– Sensitivity ±10% over temperature

• High sensitivity options:

– –11 mV/mT (OA, see Figure 17)

– –23 mV/mT (PA)

– –45 mV/mT (RA)

– –90 mV/mT (VA)

– +23 mV/mT (CA)

– +45 mV/mT (EA)

• Supports a wide voltage range

– 2.5 V to 38 V

– No external regulator required

• Wide operating temperature range

– TA = –40 to 125°C (Q, see Figure 17)

• Amplified output stage

– 2.3-mA sink, 300-μA source

• Output voltage: 0.2 V to approximately 1.8 V

– B = 0 mT, OUT = 1 V

• Fast power-on: 35 μs

• Small package and footprint

– Surface mount 3-pin SOT-23 (DBZ)

• 2.92 mm × 2.37 mm

– Through-hole 3-pin TO-92 (LPG)

• 4.00 mm × 3.15 mm

• Protection features:

– Reverse supply protection (up to –22 V)

– Supports up to 40-V load dump

– Output short-circuit protection

– Output current limitation

2 Applications

• Flow Meters

• Docking Adjustment

• Vibration Correction

• Damper Controls

3 Description

The DRV5053 device is a chopper-stabilized Hall IC

that offers a magnetic sensing solution with superior

sensitivity stability over temperature and integrated

protection features.

The 0-V to 2-V analog output responds linearly to the

applied magnetic flux density, and distinguishes the

polarity of magnetic field direction. A wide operating

voltage range from 2.5 V to 38 V with reverse polarity

protection up to –22 V makes the device suitable for a

wide range of industrial and consumer applications.

Internal protection functions are provided for reverse

supply conditions, load dump, and output short circuit

or overcurrent.