DRV5023BIQLPGMQ1.A中文资料德州仪器数据手册PDF规格书

1 Features

1• Digital Unipolar-Switch Hall Sensor

• AEC-Q100 Qualified for Automotive Applications

– Grade 1: TA = –40 to 125°C (Q, See Device

Nomenclature)

– Grade 0: TA = –40 to 150°C (E, See Device

Nomenclature)

• Inverse Output Option (FI)

• Superior Temperature Stability

– Sensitivity ±10% Over Temperature

• Multiple Sensitivity Options (BOP / BRP):

– 3.5 / 2 mT (FA, FI, see Device Nomenclature)

– 6.9 / 3.2 mT (AJ, see Device Nomenclature)

– 14.5 / 6 mT (BI, see Device Nomenclature)

• Supports a Wide Voltage Range

– 2.7 to 38 V

– No External Regulator Required

• Open Drain Output (30-mA Sink)

• Fast 35-μs Power-On Time

• Small Package and Footprint

– Surface Mount 3-Pin SOT-23 (DBZ)

– 2.92 mm × 2.37 mm

– Through-Hole 3-Pin TO-92 (LPG)

– 4.00 mm × 3.15 mm

• Protection Features

– Reverse Supply Protection (up to –22 V)

– Supports up to 40-V Load Dump

– Output Short-Circuit Protection

– Output Current Limitation

– OUT Short to Battery Protection

2 Applications

• Docking Detection

• Door Open and Close Detection

• Proximity Sensing

• Valve Positioning

• Pulse Counting

3 Description

The DRV5023-Q1 device is a chopper-stabilized Hall

Effect Sensor that offers a magnetic sensing solution

with superior sensitivity stability over temperature and

integrated protection features.

When the applied magnetic flux density exceeds the

BOP threshold, the DRV5023-Q1 open-drain output

goes low. The output stays low until the field

decreases to less than BRP, and then the output goes

to high impedance. The output current sink capability

is 30 mA. A wide operating voltage range from 2.7 to

38 V with reverse polarity protection up to –22 V

makes the device suitable for a wide range of

automotive applications.

Internal protection functions are provided for reverse

supply conditions, load dump, and output short circuit

or over current.