DRV3201QPAPRQ1.A中文资料德州仪器数据手册PDF规格书

1 Features

1• Qualified for Automotive Applications

• AEC-Q100 Test Guidance With the Following

Results:

– Device Temperature Grade 1: –40°C to 125°C

Ambient Operating Temperature

– Device HBM ESD Classification Level 2

– Device CDM ESD Classification Level C3

• 3 Phase Bridge Driver for Motor Control

• Drives 6 Separate N-Channel Power MOSFETs

up to 250-nC Gate Charge

• Programmable 140-mA to 1-A Gate Current Drive

(Source/Sink) for Easy Output Slope Adjustment

• –7-V to 40-V Compliance on All FET Driver Pins

to Handle Inductive Undershooting and

Overshooting

• Separate Control Input for Each Power MOSFET

• PWM Frequency up to 30 kHz

• Supports 100% Duty Cycle Operation

• Operating Voltage: 4.75 to 30 V

• Proper Low Supply Voltage Operation Due to

Integrated Boost Converter for Gate-Driver

Voltage Generation

• Logic Functional Down to 3 V

• Short Circuit Protection With VDS-Monitoring and

Adjustable Detection Level

• Two Integrated High Accuracy Current Sense

Amplifiers With Two Gain-Programmable Second

Stage for Higher Resolution at Low Load Current

Operation

• Overvoltage and Undervoltage Protection

• Shoot-Through Protection With Programmable

Dead Time

• Three Real Time Phase Comparators

• Overtemperature Warning and Shut Down

• Sophisticated Failure Detection and Handling

Through SPI Interface

• Sleep Mode Function

• Reset and Enable Function

• Package: 64-pin HTQFP PowerPAD™

2 Applications

• Automotive Safety Critical Motor-Control

Applications

– Electrical Power Steering (EPS, EHPS)

– Electrical Brake/Brake Assist

– Transmission

– Oil-Pump

• Industrial Safety Critical Motor-Control

Applications

3 Description

The bridge driver is dedicated to automotive 3 phase

brushless DC motor control including safety relevant

applications. It provides six dedicated drivers for

normal level N-Channel MOSFET transistors. The

driver capability is designed to handle gate charges

of 250 nC, and the driver source/sink currents are

programmable for easy output slope adjustment. The

device also incorporates sophisticated diagnosis,

protection and monitoring features through an SPI

interface. A boost converter with integrated FET

provides the overdrive voltage, allowing full control on

the power-stages even for low battery voltage down

to 4.75 V.