DP83867ISRGZR集成电路（IC）的控制器规格书PDF中文资料

DP83867ISRGZR属于集成电路（IC）的控制器。由德州仪器制造生产的DP83867ISRGZR控制器该系列产品主要用于在采用不同通信协议和/或信令方法的端点之间提供信息连接。示例包括将 I2C 总线连接到 UART，将 USB 连接到 I2C、SPI、以太网或 UART、以太网 MAC 和 PHY 等的器件。此外，还包括用于通过为点对点通信设计的接口建立多路连接的器件，例如 USB 集线器控制器。

1 Features

• Extra low latency TX < 90ns, RX < 290ns

• Time Sensitive Network (TSN) compliant

• Low power consumption: 457mW

• Exceeds 8000V IEC 61000-4-2 ESD protection

• Meets EN55011 class B emission standards

• 16 programmable RGMII delay modes on RX/TX

• Integrated MDI termination resistors

• Programmable MAC interface termination

impedance

• WoL (Wake-on-LAN) packet detection

• 25MHz or 125MHz synchronized clock output

• Start of Frame Detect for IEEE 1588 time stamp

• RJ45 mirror mode

• Fully compatible to IEEE 802.3 10BASE-Te,

100BASE-TX, and 1000BASE-T Specification

• Cable diagnostics

• RGMII and SGMII MAC interface options

• Configurable I/O voltage (3.3V, 2.5V, 1.8V)

• Fast link drop mode

• JTAG support

2 Applications

• Motor drives

• Industrial factory automation

• Field Bus Support

• Industrial embedded computing

• Wired and wireless communications infrastructure

• Test and measurement

• Consumer electronics

3 Description

The DP83867 device is a robust, low power, fully

featured Physical Layer transceiver with integrated

PMD sublayers to support 10BASE-Te, 100BASETX

and 1000BASE-T Ethernet protocols. Optimized

for ESD protection, the DP83867 exceeds 8kV IEC

61000-4-2 (direct contact).

The DP83867 is designed for easy implementation

of 10/100/1000Mbps Ethernet LANs. DP83867

interfaces directly to twisted pair media through an

external transformer. This device interfaces directly

to the MAC layer through Reduced GMII (RGMII) or

embedded clock Serial GMII (SGMII).

The DP83867 provides precision clock

synchronization, including a synchronous Ethernet

clock output. DP83867 has low latency and provides

IEEE 1588 Start of Frame Detection.

Designed for low power, the DP83867 consumes only

457mW under full operating power. Wake-on-LAN can

be used to lower system power consumption.