DP83630SQXSLASHNOPB.A中文资料德州仪器数据手册PDF规格书

1.1 Features

123

• IEEE 1588 V1 and V2 Supported

• UDP/IPv4, UDP/IPv6, and Layer2 Ethernet

Packets Supported

• IEEE 1588 Clock Synchronization

• Selectable Frequency Synchronized Low Jitter

Clock Output

• Timestamp Resolution of 8 ns

• Allows Sub 10 ns Synchronization to Master

Reference

• 12 IEEE 1588 GPIOs for Trigger or Capture

• Deterministic, Low Transmit and Receive

Latency

• Dynamic Link Quality Monitoring

• TDR Based Cable Diagnostic and Cable Length

Detection

• 10/100 Mb/s Packet BIST (Built in Self Test)

• Error-Free Operation up to 150 Meters CAT5

Cable

• ESD Protection - 8 kV Human Body Model

• 2.5 V and 3.3 V I/Os and MAC Interface

• Auto-MDIX for 10/100 Mbps

• Auto-Crossover in Forced Modes of Operation

• RMII Rev. 1.2 and MII MAC Interface

• RMII Master Mode

• 25 MHz MDC and MDIO Serial Management

Interface

• IEEE 802.3u 100BASE-FX Fiber Interface

• IEEE 1149.1 JTAG

• Programmable LED Support for Link, 10 /100

Mb/s Mode, Duplex, Activity, and Collision

Detect

• Optional 100BASE-TX Fast Link-Loss Detection

• Industrial Temperature Range

• 48 Pin WQFN Package (7mm) x (7mm)

1.2 Applications

• Telecom

– Basestation

– Pico/Femto Cells

• Factory Automation

– Ethernet/IP

– CIP Sync

• Test and Measurement

– LXI Standard

• Video Synchronization

• Real Time Networking

1.3 Description

The DP83630 Precision PHYTER™ device delivers the highest level of precision clock synchronization for

real time industrial connectivity based on the IEEE 1588 standard. The DP83630 has deterministic, low

latency and allows choice of microcontroller with no hardware customization required. The integrated 1588

functionality allows system designers the flexibility and precision of a close to the wire timestamp. The

three key 1588 features supported by the device are:

— Packet time stamps for clock synchronization

— Integrated IEEE 1588 synchronized low jitter clock generation

— Synchronized event triggering and time stamping through GPIO

DP83630 offers innovative diagnostic features unique to Texas Instruments, including dynamic monitoring

of link quality during standard operation for fault prediction. These advanced features allow the system

designer to implement a fault prediction mechanism to detect and warn of deteriorating and changing link

conditions. This single port fast Ethernet transceiver can support both copper and fiber media.