DLPC230S-Q1中文资料德州仪器数据手册PDF规格书

1 Features

• Qualified for automotive applications

• AEC-Q100 qualified with the following results:

– Device temperature grade 2: –40°C to +105°C

ambient operating temperature

– Device HBM ESD classification level 2

– Device CDM ESD classification level C4B

• Functional Safety Quality-Managed

– Documentation available to aid ISO 26262

functional safety system design up to ASIL-B

• DMD display controller supporting:

– DLP553xS-Q1 and DLP462xS-Q1 automotive

interior display chipsets

• Video processing

– Scales input image to match DMD resolution

– Bezel adjustment up ±50 vertical image

position and ±10 horizontal reducing the need

for mechanical alignment (HUD)

– Support for pixel doubling or quadrupling to

allow low resolution video input

– Gamma correction

• Embedded processor with error correction (ECC)

– On-chip diagnostic and self-test capability

– System diagnostics including temperature

monitoring, device interface monitoring, and

photodiode monitoring

– Integrated management of smooth dimming

– Configurable GPIO

• No external RAM required, internal SRAM for

image processing

• 600MHz SubLVDS DMD interface for low power

and emission

• Spread spectrum clocking for reduced EMI

• Video input interface

– Single OpenLDI (FPD-Link I) port up

to 110MHz

– 24-bit RGB parallel interface up to 110MHz

• Configurable host control interface

– Serial peripheral interface (SPI) 10MHz

– I2C (400kHz)

– Host IRQ signal to provide real-time feedback

for critical system errors

• Interface to TPS99000S-Q1 system management

and illumination controller

2 Applications

• Wide field of view and augmented reality head-up

display (HUD)

• Digital cluster, navigation, and infotainment

windshield displays

3 Description

The DLPC23xS-Q1 digital micromirror device (DMD)

Controller for automotive applications is used in

chipsets for interior and exterior display applications

with a functional safety requirement (such as

augmented reality HUDs and windshield clusters).

The DLP5530S-Q1 chipset includes a 0.55” DMD

and the DLP4620S-Q1 chipset includes a 0.46

DMD. Both chipsets also include the TPS99000S-Q1

System Management and Illumination controller. The

DLPC23xS-Q1 integrates an embedded processor

with error code correction (SECDED ECC), enabling

host control and real-time feedback, on-chip

diagnostics, and system monitoring functions. Onchip

SRAM is included to remove the need for

external DRAM. Combined with the TPS99000S-Q1,

the DLPC23xS-Q1 supports high dynamic range

dimming of over 5000:1 for HUD applications.

SubLVDS 600MHz DMD interface allows high DMD

refresh rates to generate seamless and brilliant

digital images, while simultaneously reducing radiated

emissions.

To aid in the design and manufacture of automotive

qualified projectors based on DLP technology,

there are a number of established optical module

manufacturers and design houses that can be

leveraged to support your design.