FEATURES

• Wide operating voltage range: 1.6 V to 5.5 V

• Low quiescent current of 10 μA, max. at

VDD = 1.8 V

• Integrated sense comparator for audio L of

1.4 V ± 5 threshold

• 1.2 /max. MIC bias switch provides quick discharge and

clamping

• ESD Protected

- Human body model > 8 kV

- Charged device model > 2 kV

- IEC 61000-4-2 air discharge > 15 kV

- IEC 61000-4-2 contact discharge > 8 kV

• Ultra thin and compact miniQFN10 and UTDFN10

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Cellular phones

• Tablet devices

• Portable media players

• Digital cameras

DESCRIPTION

The DG2592 is an audio jack detector and pop noise control

switch IC. It integrates the circuits necessary to detect the

presence of a stereo headset with a microphone and send /

end control button.

When there is no ear phone detected, the DG2592 connects

the microphone bias line to ground through the MIC pin. The

DG2592 also gives a logic high signal to the baseband

controller through the DET pin.

The DG2592 senses the DC levels at both L_Detect and

GND_Detect. When an ear phone is plugged in, the voltage

at both pins will go low. The DG2592 will indicate the

presence of the ear phone by pulling DET low and the MIC

switch will turn off.

The DG2592 is available in small miniQFN10 of

1.4 mm x 1.8 mm x 0.55 mm and ultra thin UTMQFN10 of

0.35 mm thickness.

DG2592DN-T1-GE4属于集成电路（IC） > 音频专用。威世科技半导体制造生产的DG2592DN-T1-GE4音频专用音频专用的半导体器件专为音频信号的滤波、驱动、放大、转换和接口而设计。特征包括功能、应用、通道数、接口、电压和规格。应用包括音频系统、汽车音频、消费类音频、乐器、专业音频、通信系统、电信系统、数字音频、驱动器、前置放大器、信号混合、信号处理、语音触发器解决方案和 10 Base-T。