DAC8564集成电路（IC）的数模转换器（DAC）规格书PDF中文资料

DAC8564属于集成电路（IC）的数模转换器（DAC）。由德州仪器制造生产的DAC8564数模转换器（DAC）数模转换器（DAC、D/A、D2A 或 D 转 A）可将数字信号转换为缓冲或无缓冲的模拟电压或电流。DAC 架构是否适合特定应用，要取决于分辨率和采样频率。DAC 通常用于音乐播放器，将数字数据流转换为模拟音频流。它们还用于电视和手机，将数字视频数据转换为模拟视频信号，再连接到屏幕驱动器，以显示单色或彩色图像。

1FEATURES

234• Relative Accuracy: 4LSB

• Glitch Energy: 0.15nV-s

• Internal Reference:

– 2.5V Reference Voltage (enabled by default)

– 0.004% Initial Accuracy (typ)

– 2ppm/°C Temperature Drift (typ)

– 5ppm/°C Temperature Drift (max)

– 20mA Sink/Source Capability

• Power-On Reset to Zero-Scale or Midscale

• Asynchronous Clear to Zero-Scale or Midscale

• Ultra-Low Power Operation: 1mA at 5V

• Wide Power Supply Range: +2.7V to +5.5V

• 16-Bit Monotonic Over Temperature Range

• Settling Time: 10μs to ±0.003% Full-Scale

Range (FSR)

• Low-Power Serial Interface with

Schmitt-Triggered Inputs: Up to 50MHz

• On-Chip Output Buffer Amplifier with

Rail-to-Rail Operation

• 1.8V to 5.5V Logic Compatibility

• Temperature Range: –40°C to +105°C

APPLICATIONS

• Portable Instrumentation

• Closed-Loop Servo-Control

• Process Control, PLCs

• Data Acquisition Systems

• Programmable Attenuation

• PC Peripherals

DESCRIPTION

The DAC8565 is a low-power, voltage-output,

four-channel, 16-bit digital-to-analog converter (DAC).

The device includes a 2.5V, 2ppm/°C internal

reference (enabled by default), giving a full-scale

output voltage range of 2.5V. The internal reference

has an initial accuracy of 0.004% and can source up to 20mA at the VREFH/VREFOUT pin. The device is

monotonic, provides very good linearity, and

minimizes undesired code-to-code transient voltages

(glitch). The DAC8565 use a versatile 3-wire serial

interface that operates at clock rates up to 50MHz. It

is compatible with standard SPI™, QSPI™,

Microwire™, and digital signal processor (DSP)

interfaces.

The DAC8565 incorporates a power-on-reset circuit

that ensures the DAC output powers up at either

zero-scale or midscale until a valid code is written to

the device. The device contains a power-down

feature, accessed over the serial interface, that

reduces the current consumption of the device to

1.3μA at 5V. The low power consumption, internal

reference, and small footprint make this device ideal

for portable, battery-operated equipment. The power

consumption is 2.9mW at 3V, reducing to 1.5μW in

power-down mode.

The DAC8565 is drop-in and functionally compatible

with the DAC7564 and DAC8164, and functionally

compatible with the DAC7565, DAC8165, and

DAC8564. All these devices are available in a

TSSOP-16 package.