DAC7611UB/2K5集成电路（IC）的数模转换器（DAC）规格书PDF中文资料

DAC7611UB/2K5属于集成电路（IC）的数模转换器（DAC）。由美国德州仪器公司制造生产的DAC7611UB/2K5数模转换器（DAC）数模转换器（DAC、D/A、D2A 或 D 转 A）可将数字信号转换为缓冲或无缓冲的模拟电压或电流。DAC 架构是否适合特定应用，要取决于分辨率和采样频率。DAC 通常用于音乐播放器，将数字数据流转换为模拟音频流。它们还用于电视和手机，将数字视频数据转换为模拟视频信号，再连接到屏幕驱动器，以显示单色或彩色图像。

FEATURES

LOW POWER: 2.5mW

FAST SETTLING: 7ms to 1 LSB

1mV LSB WITH 4.095V FULL-SCALE

RANGE

COMPLETE WITH REFERENCE

12-BIT LINEARITY AND MONOTONICITY

OVER INDUSTRIAL TEMP RANGE

ASYNCHRONOUS RESET TO 0V

3-WIRE INTERFACE: Up to 20MHz Clock

ALTERNATE SOURCE TO DAC8512

APPLICATIONS

PROCESS CONTROL

DATA ACQUISITION SYSTEMS

CLOSED-LOOP SERVO-CONTROL

PC PERIPHERALS

PORTABLE INSTRUMENTATION

DESCRIPTION

The DAC7611 is a 12-bit digital-to-analog converter

(DAC) with guaranteed 12-bit monotonicity performance

over the industrial temperature range. It requires

a single +5V supply and contains an input shift

register, latch, 2.435V reference, DAC, and high speed

rail-to-rail output amplifier. For a full-scale step, the

output will settle to 1 LSB within 7ms. The device

consumes 2.5mW (0.5mA at 5V).

The synchronous serial interface is compatible with a

wide variety of DSPs and microcontrollers. Clock

(CLK), serial data in (SDI), and load strobe (LD)

comprise the serial interface. In addition, two control

pins provide a chip select (CS) function and an asynchronous

clear (CLR) input. The CLR input can be

used to ensure that the DAC7611 output is 0V on

power-up or as required by the application.

The DAC7611 is available in an 8-lead SOIC or 8-pin

plastic DIP package and is fully specified over the

industrial temperature range of –40°C to +85°C.