DAC7513E/250集成电路（IC）的数模转换器（DAC）规格书PDF中文资料

DAC7513E/250属于集成电路（IC）的数模转换器（DAC）。由德州仪器制造生产的DAC7513E/250数模转换器（DAC）数模转换器（DAC、D/A、D2A 或 D 转 A）可将数字信号转换为缓冲或无缓冲的模拟电压或电流。DAC 架构是否适合特定应用，要取决于分辨率和采样频率。DAC 通常用于音乐播放器，将数字数据流转换为模拟音频流。它们还用于电视和手机，将数字视频数据转换为模拟视频信号，再连接到屏幕驱动器，以显示单色或彩色图像。

FEATURES

microPOWER OPERATION: 115μA at 5V

POWER-ON RESET TO ZERO

POWER SUPPLY: +2.7V to +5.5V

ENSURED MONOTONIC BY DESIGN

SETTLING TIME: 10μs to 1LSB

LOW-POWER SERIAL INTERFACE WITH

SCHMITT-TRIGGERED INPUTS

ON-CHIP OUTPUT BUFFER AMPLIFIER,

RAIL-TO-RAIL OPERATION

SYNC INTERRUPT FACILITY

SOT23-8 AND MSOP-8 PACKAGES

APPLICATIONS

PROCESS CONTROL

DATA ACQUISITION SYSTEMS

CLOSED-LOOP SERVO-CONTROL

PC PERIPHERALS

PORTABLE INSTRUMENTATION

PROGRAMMABLE ATTENUATION

DESCRIPTION

The DAC7513 is a low-power, single, 12-bit buffered voltage

output Digital-to-Analog Connector (DAC). The on-chip precision

output amplifier allows rail-to-rail output swing to be

achieved. The DAC7513 uses a versatile 3-wire serial interface

that operates at clock rates up to 30MHz and is compatible

with standard SPI™, QSPI™, Microwire™, and DSP interfaces.

The DAC7513 requires an external reference voltage to set

the output range of the DAC, this allows the DAC7513 to be

used in a multiplying mode. The DAC7513 incorporates a

power-on reset circuit which ensures that the DAC output

powers up at 0V and remains there until a valid write takes

place to the device. The DAC7513 contains a power-down

feature, accessed over the serial interface, that reduces the

current consumption of the device to 200nA at 5V.

The low-power consumption of this part in normal operation

makes it ideally suited to portable battery-operated equipment.

The power consumption is 0.5mW at 5V reducing to

1μW in power-down mode.

The DAC7513 is available in an SOT23-8 package and an

MSOP-8 package.

SPI and QSPI are registered trademarks of Motorola.

Microwire is a registered trademark of National Semiconductor.