DAC0800LCMXSLASHNOPB.B中文资料德州仪器数据手册PDF规格书

1FEATURES

2• Fast Settling Output Current: 100 ns

• Full Scale Error: ±1 LSB

• Nonlinearity Over Temperature: ±0.1%

• Full Scale Current Drift: ±10 ppm/°C

• High Output Compliance: −10V to +18V

• Complementary Current Outputs

• Interface Directly with TTL, CMOS, PMOS and

Others

• 2 Quadrant Wide Range Multiplying Capability

• Wide Power Supply Range: ±4.5V to ±18V

• Low Power Consumption: 33 mW at ±5V

• Low Cost

DESCRIPTION

The DAC0800 series are monolithic 8-bit high-speed

current-output digital-to-analog converters (DAC)

featuring typical settling times of 100 ns. When used

as a multiplying DAC, monotonic performance over a

40 to 1 reference current range is possible. The

DAC0800 series also features high compliance complementary current outputs to allow differential

output voltages of 20 Vp-p with simple resistor loads.

The reference-to-full-scale current matching of better

than ±1 LSB eliminates the need for full-scale trims in

most applications, while the nonlinearities of better than ±0.1% over temperature minimizes system error

accumulations.

The noise immune inputs will accept a variety of logic

levels. The performance and characteristics of the

device are essentially unchanged over the ±4.5V to

±18V power supply range and power consumption at

only 33 mW with ±5V supplies is independent of logic

input levels.

The DAC0800, DAC0802, DAC0800C and

DAC0802C are a direct replacement for the DAC-08,

DAC-08A, DAC-08C, and DAC-08H, respectively. For

single supply operation, refer to AN-1525.