带缓冲输出的8BIT D/A转换器电路

D88347是一块带缓冲输出的8BIT D/A转换器电路。 ·转换方式：R-2R梯形电阻\n·带运算放大输出缓冲的8位*8通道 D/A转换器\n·最大串行数据输入值：2.5MHz\n·最大DAC输出时间：100μS\n·单电源供电：5V\n·封装形式：SOP16、TSSOP16;

Silicore

芯谷科技

数模转换器（DAC）

D88347是一种R-2R型8位分辨率数模转换器（DAC），设计用于与广泛的通用4位和8位微控制器的接口。

Silicore

芯谷科技

R-2R TYPE 8-BIT D/A CONVERTER WITH OPERATIONAL AMPLIFIER OUTPUT BUFFERS

■DESCRIPTION The MB88347 features 8 channels of 8-bit D/A converters (with output amplifiers). The output amplifier provides high current drive capability. As data is input via a seriallink, only three control lines are required, and cascaded connections can be used. The MB88347 is suitable for

文件：190.74 Kbytes 页数：20 Pages

FUJITSU

富士通

D/A Converter for Digital Tuning (8-channel, 8-bit, on-chip OP amp, low-voltage)

■ DESCRIPTION The MB88347L incorporates eight 8-bit D/A converter modules. This device operates at low supply voltage in the performance guarantee range from 2.7 to 3.6 V. It also contains an output amplifier, allowing driving at large current. Since the MB88347L inputs data in serial mode, it r

文件：169.85 Kbytes 页数：16 Pages

FUJITSU

富士通

D/A Converter for Digital Tuning (8-channel, 8-bit, on-chip OP amp, low-voltage)

■ DESCRIPTION The MB88347L incorporates eight 8-bit D/A converter modules. This device operates at low supply voltage in the performance guarantee range from 2.7 to 3.6 V. It also contains an output amplifier, allowing driving at large current. Since the MB88347L inputs data in serial mode, it r

文件：169.85 Kbytes 页数：16 Pages

FUJITSU

富士通